Abstract:This paper presents a novel design of a wideband millimeter-wave balanced bandpass filter (BPF) for use in a high-sensitivity Q-band reception system for solar radio spectrum observation. The balanced BPF has differential-mode (DM) band-pass and common-mode (CM) band-stop characteristics, which effectively suppress noise and reduce electromagnetic interference in its operating frequency band. The filter design incorporates half-wavelength rectangular micro-coaxial transmission lines as resonators and coupling between resonators is achieved through J-inverters. The wideband CM suppression is improved by adjusting the distribution of CM transmission zeros by adding open-circuited branches on the symmetrical plane. The micro-coaxial structure is fabricated on a 4-inch silicon wafer through a three-dimensional additive manufacturing process. The compactness, low loss, and wideband performance make it ideal for this application. As a design example, a fifth-order Chebyshev balanced BPF was fabricated and measured to demonstrate the design method. The measured results indicate that the balanced BPF operates within a frequency range of 30-50GHz, with an insertion loss of 1.63dB and over 26dB CM suppression in the DM passband. These results are in general agreement with simulation results. To the best of our knowledge, this is the first time that a micro-coaxial structure has been proposed for this application.

Novel Wideband Balanced Bandpass Filter Based on Multi-Mode Resonator

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Design of novel multiband bandpass filters based on coupled symmetric short‐circuit stub multimode resonators

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Wide Transmission Band Rasorber of Center‐connected Pattern with Multi‐resonators

Q-band balanced bandpass filter based on rectangular micro-coaxial transmission line with improved common-mode suppression

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator

Superconducting Wideband Bandpass Filter Based on Triple-Mode Resonator

High-selectivity wideband bandpass filter based on quintuple-mode stub-loaded resonator and defected ground structures

Wideband Bandpass Filter with Wide Stopband Using Loaded BCMC Stub and Short-Stub

Design of compact balanced filters with wide DM upper stopband and CM rejection band based on semi‐circular patch

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities

Balanced Dielectric Resonator Filters With Multiple Reconfigurable Passbands