Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Fabrication and characteristic of a simplified hollow-core microstructured fiber

A Single-Mode Polarization Maintaining Hollow Core Photonic Bandgap Fiber

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Hollow Core Micro-Fiber for Optical Wave Guiding and Microfluidic Manipulation

Fabrication and Experimental Observation of Monolithic Multi-Air-core Fiber Array for Image Transmission.

Design guidelines and characteristics of beam-shaping microstructure optical fibers

Design and Optimization of Multi-core Fibers with Low Crosstalk and Large Effective Area

A simplified Mid-infrared anti-resonant chalcogenide fiber with fewest resonant peaks

Realization of All-in-Fiber Liquid-Core Microstructured Optical Fiber

Multi-core anti-resonant hollow core fibre

Ultra-simplified Single-Step Fabrication of Microstructured Optical Fiber

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

A multi-core fiber coupler without a central core

Characteristic Analysis and Structural Design of Hollow-Core Photonic Crystal Fibers with Band Gap Cladding Structures

Fabrication and characteristics of twin core erbium doped fiber

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Truncated Anti-Resonant Hollow-Core Fiber for Reduced Microstructure Diameter

Rapid Fabrication of Microhole Array Structured Optical Fibers

Suspended core subwavelength fibers: practical designs for the low-loss terahertz guidance

A Broadband Optical Fiber Coupler Based on Dual-Hollow Core Fiber

Quaternary One-Dimensional Photonic Crystal Cladding Hollow-Core Bragg Fiber