Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

Modeling and Variable Structure Control of A Vehicle Flexible Manipulator

Dynamic Modeling and Trajectory Tracking Control of a Novel Muck-Removal Hydraulic Manipulator

Trajectory Tracking Control of A Hydraulic Parallel Robot Manipulator with Lumped Disturbance Observer

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Modeling and trajectory tracking control of vehicle hydraulic rigid-flexible manipulator based on the expected joint angle compensation

Trajectory Tracking And Vibration Control Of Vehicle Hydraulic Rigid - Flexible Manipulator With Input Constraints

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Modeling and Control of Flexible Joint Robotic Manipulator

Motion Control of a Hydraulic Manipulator with Adaptive Nonlinear Model Compensation and Comparative Experiments

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

Decoupled Dynamic Model and Control of Flexible Space Manipulator

Adaptive Sliding Mode Control for Hydraulic Flexible Manipulator Based on Two-Parameter Singular Perturbation Method

Fuzzy Variable Structure Control for Trajectory Tracking of Two-Link Flexible Manipulators

Experimental Study for Trajectory Tracking of a Two-Link Flexible Manipulator

Sliding mode control using switching gain for a vehicle flexible manipulator

Trajectory tracking control of two-link flexible manipulator

Dynamic modeling and sensor-based stable control for two-link flexible manipulators

Variable Structure Control of Flexible Manipulator Based on Distributed Parameter Model

TRAJECTORY TRACKING CONTROL AND VIBRATION SUPPRESSION OF RIGID FLEXIBLE MANIPULATORS

A New Exponential Reaching Law of Sliding Mode Control for Vehicle-Mounted Rigid - Flexible Manipulator

Trajectory Control of Robot Manipulator Using Variable Structure Model-Reaching Control Strategy