Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Experimental Analysis on Shear Strength Characteristics of Sand-Gravel Mixtures

Shear Modulus and Damping Ratio of Sand–Gravel Mixtures Over a Wide Strain Range

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

3D Discrete Element Modeling of Aggregate Homogeneity Influence on Bituminous Mix Shear Strength

Experimental study on shear wave velocity of sand-gravel mixtures considering the effect of gravel content

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Experiment of initial relative density effects on sand strength

Influence of fines and gravel particles on strength-dilatancy of river sand: Effect of depositional conditions

Undrained cyclic failure mechanisms and resistance of saturated sand-gravel mixtures

3D Morphology Distribution Characteristics and Discrete Element Simulation of Sand-Gravel Mixtures

Effect of Rubber-Sand Mixtures Gradation on Shear Characteristics of Mixed Soil

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Evaluation of volumetric threshold shear strain of gravel-sand mixtures in centrifuge model tests

Effect of aperture ratio on the cyclic shear behaviour of aggregate-geogrid interfaces

Experimental Study on Shear Failure Mechanism and the Identification of Strength Characteristics of the Soil-Rock Mixture

Cyclic Behaviors of Saturated Sand-Gravel Mixtures under Undrained Cyclic Triaxial Loading

EXPERIMENTAL RESEARCH ON SHEAR STRENGTH CHARACTERISTICS OF SOIL-ROCK MIXTURES

Laboratory Investigation of the Unsaturated Shear Strength Characteristics of Sand–Clay Mixtures

Effect of Initial Density, Particle Shape, and Confining Stress on the Critical State Behavior of Weathered Gap-Graded Granular Soils

Behavior of Shear Strength of Coarse Grained Materials Based on Large Scale Direct Shear Test (I)