Abstract:The curved part with open-and-close angle conversion features is a kind of well-known difficult-to-machine part. Using traditional five-axis serial machine tools (SMTs) may cause efficiency and accuracy reduction at open-and-close angle conversion regions because of the singular points in their orientation workspace. How to achieve high-efficiency and high-precision machining of this kind of curved part is a challenging issue in the field. In order to solve this problem, a parallel machining robot (PMR) with five degrees of freedom (DoFs) is developed. Accordingly, the attitude coupling adjustment mechanism of the developed PMR is disclosed, which indicated that a small change of the tool orientation will never lead to a large range motion of the driving limbs. Thus the robot has the potential to pass through open-and-close angle conversion regions smoothly. In order to take full use of the advantages of the developed PMR in attitude adjustment, a control method is proposed by fitting tool orientation spline in unit spherical coordinate system. On this basis, toolpath planning and machining experiments are carried out to verify the performance of the developed PMR and the proposed control method when machining parts with open-and-close angle conversion features. Experimental results demonstrate that the developed machining robot integrated with the proposed control method can improve the machining efficiency and accuracy significantly when compared with the SMT. This proves that the attitude coupling motion property of PMRs can solve the difficulty in high-performance machining of open-and-close angle conversion features. The findings of this study fundamentally provide a feasible way to overcome the abnormal phenomena when machining curved parts with open-and-close angle conversion features.

Research on Non-circular CNC Turning Technology Based on High Response Linear Motor

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Design Method and Numerical Control Machining Principle for an Arbitrary N-Polygon Noncircular Section

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

A Novel Helical Milling End-Effector and Its Application

High speed feed control algorithm with piecewise linear continuous jounce

The Analysis for Real-Time Performance and Realization of CNC System on Middle-Convex and Varying Ellipse Piston Machining

Research on Double-channel Control of Non-circular Piston Machining

Extracted Control Approach For Cnc Non-Circular Turning

A precision CNC turn-mill machining center with gear hobbing capability

Research On The Key Technologies Of Cnc Noncircular Camshaft Grinding

Non-circular gear continuous generating machining interpolation method and experimental research

Research on Key Technology of Variable Spindle Speed Noncircular Turning Process

A parallel machining robot and its control method for high-performance machining of curved parts

High-efficiency Machining of Large Aspect-Ratio Rotational Parts by Rapid Contour Approaching WEDM

Research of Feed Control System for Linear Motor Based on PMAC

The Turning Characteristics of Double-spindle and Double-tool NC Machine

Local corner smoothing algorithm for screw motor high-precision machining

Analysis and improvement of machining stability in noncircular turning

Research on Compound PID Control Strategy Based on Input Feedforward and Dynamic Compensation Applied in Noncircular Turning