Abstract:Different pitch parameters of the tool can lead to the changes in the delay of the machining system. A mechanical model of the variable pitch tool is developed by taking the regenerative chatter into account in the machining system with multiple delays. The dynamic differential equations with multiple delays are studied based on the fully discrete method; the Gaussian integral method is used to approximate the state item of the vibration response in the discrete interval, and the periodic and the delay items are linearly approximated to determine the transition matrix of the discrete state in the multiple delays period. The relationship between cutting force coefficients and cutting parameters is defined based on the size effect of the tool-workpiece contact area; a nonlinear model of the cutting force coefficients is presented by the cutting force detection experiment of aluminum alloy milling with the variable pitch tool. The state transition matrix of the multiple delays system is obtained by combining the Gauss full discrete method with the nonlinear cutting force coefficients, and then the effectiveness of the proposed method is verified by analyzing the convergence degree of the eigenvalue of state transition matrix. At the same time, the relationship between cutting parameters and the stability critical of the machining system is analyzed to draw the three-dimensional stability lobe diagram, which makes it clear that the limiting cutting depth of the tool increases about 2–3 times as the cutting width decreases. Combining with a cutting stability experiment of the variable pitch tool, it is verified that the dynamic model with the nonlinear dynamic parameters has higher prediction accuracy of the cutting stability than others. And it is observed that the eigenvalue of changes of the dynamic model is more violently in the low speed region (2000–4000 rpm), which indicates that the stability of the processing system is more sensitive to the cutting depth under the low speed condition, and the vibration reduction performance of variable pitch tools is more significant.

Research on Key Technology of Variable Spindle Speed Noncircular Turning Process

An Investigation of Practical Application of Variable Spindle Speed Machining to Noncircular Turning Process

Analysis and improvement of machining stability in noncircular turning

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Chatter Suppression in Fast Tool Servo-Assisted Turning by Spindle Speed Variation

Application of active disturbance rejection control to variable spindle speed noncircular turning process

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Dynamic modeling and vibration response analysis of high speed motorized spindle

Stability analysis for variable spindle speed milling via the 3rd-order Newton-Cotes method

Stability analysis for milling system with variable pitch cutters under variable speed

Research on dynamic characteristics of turning process system based on finite element generalized dynamics space

A Review of Key Technologies for High-Speed Motorized Spindles of CNC Machine Tools

Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

Thermal characterizations and model of high speed motorized spindle in virtual-reality

The Turning Characteristics of Double-spindle and Double-tool NC Machine

Optimum Cutting Tool Motion for Noncircular Turning

Research on Efficiency and Stability of Computer Numerical Control Lathe

Research on the spindle opimazing and variational design technique of plane grinder

Stability for multiple delays machining system with variable pitch tools considering nonlinear cutting force coefficients

Modeling and dynamic response of variable mass system of maglev turning electric spindle

Rotation error separation of a UTF300 high-speed and precision motorized spindle