Abstract:This paper employs the Finite Element Method (FEM) to simulate and analyze the effects of corrosion defect parameters on the stress and failure pressure of pipelines. It investigates how the boundary conditions of the pipeline model influence stress and examines the sensitivity of failure pressure to corrosion defect parameters. A nonlinear regression equation has been developed from a dataset obtained through simulation experiments to predict the failure pressure of corroded pipelines. To validate the effects of corrosion defect parameters on failure pressure, a hydrostatic test platform for an API 5L X65 pipeline with corrosion defects was established to measure stress levels and failure pressures across varying corrosion defects. The study reveals that failure pressure is negatively correlated with corrosion length and depth, while positively correlated with corrosion width. Among these parameters, corrosion depth exerts a more significant influence on the pipeline's failure pressure than corrosion length and width. Within the range of corrosion defect parameters examined, the maximum deviation of the prediction equation's results from the simulation results is 8.71%, with an average deviation of 5.81%. The standard deviation of the fitted residuals is 0.01837. Additionally, the maximum deviation between the predicted results and experimental measurements is 8.39%, with an average deviation of 7.77%. The strong agreement between the predicted results from the equation and the actual measured data underscores the effectiveness of the nonlinear regression equation.

The Simulation Research on Ultrasound Signal Propagation Model for Oil and Gas Pipeline Corrosion

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Simulation Research on Erosion Thickness Measurement of Oil and Gas Pipeline Based on Array Electromagnetic Ultrasound

Simulation Research on Gas-solid Coupling Vibration Characteristics of the Ultra-high Pressure Pipeline

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

Application Research of Ultrasonic-Guided Wave Technology in Pipeline Corrosion Defect Detection: A Review

Multi-physics coupled simulation and experimental investigation of alternating stray current corrosion of buried gas pipeline adjacent to rail transit system

Experimental and numerical simulation of erosion-corrosion of 90° steel elbow in shale gas pipeline

Research on 3-D Simulation of Remote Field Eddy Current Detection for Pipeline Cracks

Computational Fluid Dynamic Simulation of Leakage Acoustic Waves Propagation Model for Gas Pipelines

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

Corrosion prediction in high-sulfur low-pressure vent pipelines based on wall liquid phase aggregation and droplet erosion

EMI Instrumented Conical Corrosion Measuring Probe for Pipeline Corrosion Monitoring: Experiments with FEM Validation

Simulation Analysis on Cracks Detection Based on RFEC in Long-distance Oil and Gas Pipeline

A unified model and simulation method for elastoplastic stress–erosion interaction

Numerical analysis of dispersion characteristics of underwater gas-oil two-phase leakage process

Transient Simulation Analysis on Magnetic Flux Leakage Detection of Cracks in Long-Distance Oil and Gas Pipeline

Simulation Analysis of Ultrasonic Guided Waves on Gas Flow Measurement

A New Anelasticity Model for Wave Propagation in Partially Saturated Rocks

Physical Simulation of Hydraulic Fracturing of Shale Gas Reservoir