Abstract:Glass is a widely used material in key fields such as Micro-Electro-Mechanical Systems (MEMS) due to its excellent properties. The existing non-traditional glass machining methods have problems such as high pollution, difficult operation, and poor sustainability, this article utilizes the effective combination of electrochemical discharge machining and grinding (named electrochemical discharge grinding, ECDG), by using NaHCO 3 solution as electrolyte to achieve green machining. Utilizing ultrasonic vibration and multi-hole tube electrode to achieve precise and stable machining. Modeling and simulation analysis were conducted on the material removal rate and grinding force during the machining process, which profoundly revealed the joint improvement mechanism of spark discharge and ultrasonic vibration on grinding quality. First, a single factor experiment was used to preliminarily determine the machining threshold. Second, the Plackett-Burman experiment was used to screen key machining parameters. Then, Box-Behnken experiment was conducted on key machining parameters, and multi-objective and multi-factor optimization was performed to obtain the optimal combination of machining parameters. Compared with normal ECDG with cylindrical grinding electrode, the overcut is reduced by 8.3 %, the edge damage is reduced by 17.5 % and the surface roughness value is reduced by 70.6 %. Finally, by using the optimized combination of machining parameters, high-quality and stable machining of typical microchannel structures was achieved. The milling depth of the microchannel is 400 μm. The machining width is 1175 ± 5 μm. The surface roughness of the measurement area is 0.375 μm. The green, high-quality and stable machining of micro glass micro components further demonstrates the potential application of this compound technology.

High-Reliable Powder Blasting Micro-Machining Technology of Glass with Elastomer Mask

Research of Powder Blasting Based Ona New Type PDMS Mask

Effect of a Photolithography Polymer Mask's Dynamic Viscoelasticity on Microchannel Cross-Sectional Shapes of Glass Processed by Micropowder Blasting

Stress-Etching Using Laser Electrochemical Micromachining with Masks

Separated Type Atmospheric Pressure Plasma Microjets Array for Maskless Microscale Etching

A green and precision compound machining method for glass micro components – Ultrasonic assisted electrochemical discharge grinding with multi-hole tube electrode

Form Control In Atmospheric Pressure Plasma Processing Of Ground Fused Silica

Surface Texture Evolution of Fused Silica in a Combined Process of Atmospheric Pressure Plasma Processing and Bonnet Polishing

Application of PECVD SiC in glass micromachining

Processing and Profile Control of Microhole Array for PDMS Mask with Femtosecond Laser

Subsurface Damage Structure and Eliminating

Design of the Atmospheric Pressure Low Temperature Plasma Polishing System for the Machining of Ultra-Smooth Surfaces

Jet Electrochemical Micromachining Of Micro-Grooves With Conductive-Masked Porous Cathode

Ceramics Fabrication Using Rapid Prototyping of Mask Projection Stereolithography

High speed and low roughness micromachining of silicon carbide by plasma etching aided femtosecond laser processing

Chemical Mechanical Polishing of Micro-structures on SSiC

Electrochemical polishing of microfluidic moulds made of tungsten using a bi-layer electrolyte

Precision Grinding of a Microstructured Surface on Hard and Brittle Materials by a Microstructured Coarse-Grained Diamond Grinding Wheel

Precision Control Methods in the Fabrication of Mask Via Femtosecond Laser Irradiation

Accuracy of the pattern transfer from the metal mask to the workpiece surface during multiphase jet machining

A study of laser machining combined with dynamic chemical etching in micro‐hole drilling of 2.5D SiCf/SiC composites