Abstract:Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) offer an alternative to traditional reinforced concrete columns for new construction applications due to their high strength, ductility, and corrosion resistance properties. Despite their popularity, there is a lack of accurate analytical models for the cyclic/seismic performance of CFFT columns. This is due to the absence of precise stress–strain models for FRP tubes and confined concrete under cyclic loading. Previous experiments on CFFT columns suggest that even minimal reinforcement (≤1%) provides essential energy dissipation for extreme events. However, existing stress–strain models for FRP-confined concrete often neglect the contribution of longitudinal and transverse steel reinforcement. While some researchers have proposed material models to address this issue, the analytical modeling of confinement effects from both steel reinforcement and FRP tubes, especially under lateral cyclic loading, continues to pose a significant challenge. This study aims to use previously collected experimental data to evaluate current analytical modeling approaches in OpenSeesPy3.5.1.12 to simulate the lateral cyclic behavior of CFFT columns with ±55° glass fiber-reinforced polymer (GFRP) fiber orientation. Both the lumped inelasticity and the distributed inelasticity modeling approaches are applied. The performance of various FRP confinement models is compared. The effect of plastic hinge length is also considered in the lumped plasticity approach. The findings suggest that integrating a fiber element section into the plastic hinge zone enhances the efficiency of the distributed inelasticity approach. This method accurately captures the non-linear behavior in the critical region and precisely predicts the shape of the hysteretic curve, all while reducing computational costs. Conversely, the lumped inelasticity modeling approach effectively forecasts energy dissipation and peak load values across the entire cyclic hysteresis curve, offering significant computational savings. Finally, a generalized modeling methodology for predicting the response of CFFTs under cyclic lateral load is proposed and subsequently validated using experimental results found in the existing literature.

CFRP-Confined Square RC Columns. II: Cyclic Axial Compression Stress-Strain Model

Theoretical Model for Slender FRP-confined Circular RC Columns

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

FRP Spiral Strip-Confined Concrete Columns: Stress-strain Behavior and Size Effect

Path-Dependent Stress–Strain Model for FRP-Confined Recycled Brick Aggregate Concrete

Effectiveness of CFRP Confinement and Compressive Strength of Square Concrete Columns

Analysis and Behaviour of FRP-confined Short Concrete Columns Subjected to Eccentric Loading

Cyclic axial compression stress-strain model for FRP-confined concrete-encased cross-shaped steel columns

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Analytical Model of Circular CFRP Confined Concrete-Filled Steel Tubular Columns under Axial Compression

Stress-Strain Behaviour Of Frp-Confined Concrete Subjected To Eccentric Compression

Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP

Axial Compressive Behavior of FRP-confined Square CFST Columns Reinforced with Internal Latticed Steel Angles for Marine Structures

Load-Strain Model for Steel-Concrete-FRP-Concrete Columns in Axial Compression

Analysis of CFRP-confined CFST Columns Reinforced with Steel Angles under Axial Compression

FRP-confined concrete in circular sections: Review and assessment of stress–strain models

Analytical Modeling Approaches for the Cyclic Behavior of Concrete-Filled Circular Filament Wounded GFRP Tube Columns

Design-Oriented Modeling of Circular Frp-Wrapped Concrete Columns after Sustained Axial Compression

A unified stress-strain model for LRS FRP-confined concrete columns with square and circular cross-sections

STRESS-STRAIN MODEL FOR FRP-STRENGTHENED WOOD COLUMN UNDER AXIAL COMPRESSION