Abstract:Abstract Cutting temperature is playing a key role in evaluating the cutting process, which significantly affects the tool wear and the quality of the workpiece. Aiming at the problems of low precision, low aging, and poor stability of cutting temperature measurement on the front tool face, an integrated design and production scheme of a high sensitivity built-in wireless temperature measurement tool was proposed. The temperature distribution position on the front tool face was analyzed with 3D finite element simulation software, and the thermal contact position of the main and secondary film thermocouples was determined. SiO2 insulated films and NiCr/NiSi film thermocouples were prepared on the front tool surface by femtosecond laser micromachining, electrolyte-plasma polishing, plasma enhanced chemical vapor deposition and magnetron sputtering, and a static calibration experiment system for sensitivity and accuracy of the temperature measuring tool for the film thermocouple was established, and Seebeck coefficient of the film thermocouple was obtained. According to the actual cutting conditions, the wireless temperature measuring system of the thin film thermocouple tool was built and the field cutting test was carried out to obtain the influence law of different cutting parameters on the cutting temperature, and further verify the feasibility of the thin film temperature measuring sensor. The research results show that: Seebeck coefficients of the two kinds of thermocouples prepared by the NiCr/NiSi thin film thermocouple temperature measuring tool are 34.97 μV/°C and 34.96 μV/°C, and the slope of the temperature data fitting curve is 1.00398 and 0.997475, respectively. The linear correlation coefficient R2 is close to 1, which is close to the standard K-type thermocouple, which shows good sensitivity and accuracy. At the same time, the temperature measurement results are close to the commercial standard K thermocouple, and the error is less than 5%, indicating that the developed film thermocouple has a high measurement accuracy and can meet the needs of temperature measurement. Actual cutting test is carried out with developed wireless temperature measuring device of thin film thermocouple, which shows this device can meet the requirements of tool temperature measurement, and the feasibility of thin film temperature measuring sensor is further verified. The research provide technical reference for industrial intelligent manufacturing in order to realize the wireless measurement of cutting area temperature of tool front.

Fem-based design and analysis of a smart cutting tool with internal cooling for cutting temperature measurement and control

Thermal Design And Analysis Of An Internally Cooled Smart Cutting Tool And Its Implementation Perspectives

An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

Dynamical Temperature Monitoring System Design for High-speed Cutting Based on Thin-film Thermocouples

Investigation of a novel green internal cooling in turning application.

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Modeling and Monitoring of the Tool Temperature During Continuous and Interrupted Turning with Cutting Fluid

Integrated design and fabricate of high sensitivity built-in thin-film thermocouple temperature measurement tool

Characterization and Optimization of a Locally Boron-Doped Diamond Tool for Self-sensing of Cutting Temperature

Method of Precisely Measuring Tool Nose Temperature in Machining with Help of FEM Heat Transfer Analysis

Design and Analysis of A Self-Sensing Smart Cutting Tool Integrated Piezoelectric Films for Cutting Force Monitoring in Ultra-Precision Machining

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

Design of machine tool cooling system and optimization of cooling parameters based on differential cooling control strategy

Cutting temperature measurement in turning using fiber-optic multi-spectral radiation thermometry and its application in tool wear status recognition

An Improved Method for Acquisition of High-Speed Cutting Zone Temperature Based on Heat Conduction Reverse Seeking

Design of an instrumented smart cutting tool and its implementation and application perspectives

Modeling and Analysis of Intermittent Cutting Temperature Field for the "S" Test Specimens

Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives

Comprehensive Evaluation Analysis and Optimization Methodology of Tool Geometric Parameters for High Speed Cutting