Abstract:This paper is concerned about a renovated method for preparing the compound micro-organic material for removing iron(Ⅱ) and manganese(Ⅱ) from the groundwater.The method we have developed can be stated as follows:the compound micro-organic material used for removing the two heavy metal residue can be shown as follows: the natural bran mixed with the strain 4 - 05(Pseudomonas sp.) with sodium carboxy methyl cellulose(CMC) as adhesive can be separated in the laboratory,and then introduced into the globular micro -organic compound material.The prepared material can then be tested for its efficiency of Fe~(2+) and Mn~(2+) removal so as for the preparation processing to be optimized through batch experiments.The chief factors influencing the removing process are exactly what we want to find in our optimization experiments.So far as we know, sodium carboxy methyl cellulose and the particle size are closely associated with the removing process.The adhesive contents were chosen from 6%to 14%while considering the molding condition and disintegration. The results of our adsorption experiments reveal that the Fe~(2+) and Mn~(2+) removing power are increasing on the condition of keeping the content of sodium carboxy methyl cellulose within a range from 6%to 14%.Moreover,in such a condition,the removing efficiency can be made to reach as high as 95.72%for Fe~(2+) and 41.93%for Mn~(2+),respectively.In addition,we have done batch experiments with different sizes of particles,such as 0.5 cm,1.5 cm and 2.5 cm.The above said experiments let us know that the removal efficiency of Fe~(2+) could be improved by increasing the particle size. The removal efficiency of Mn~(2+) was uptrend at the beginning,and then can reach its maximal removing rate to as high as 62.35%with the particle size being 2.5 cm on average.But a 4-day period later, the residual content of Mn~(2+) tended to rise with its removal efficiency declining.And,finally,the results of our experiments show that the best condition of preparation should be kept with the adhesive content being 14%and the particle size being 2.5 cm.Under such conditions, it is possible to make the removing efficiency reach 95.90% and 62.35%for Fe~(2+)(initial concentration = 80 mg/L) and Mn~(2+) (initial concentration = 2.5 mg/L) respectively.Thus,it can be seen that the method we have proposed can contribute a great deal to the preparation of new compound microorganic materials and the increase the Fe~(2+) and Mn~(2+) removing efficiency from the groundwater.

Study on removal of iron and manganese from mine water by method of medicament

Study on the preparation optimization and characteristics of modified media for coal-mine wastewater treatment with high iron and high manganese concentration

Investigation on the Efficiency and Mechanism of Iron and Manganese Removal from Acid Mine Drainage Using Serpentine-Loaded Manganese Oxide

The Simultaneous Removal of Ammonium and Manganese from Surface Water in South China by Manganese Co-Oxide Film

On Removing High-Concentrated Manganese Residue in the Mining Sewage with Porous Composites in Static Test

On Preparing Compound Micro-Organic Materials for Removing Iron( Ⅱ ) and Manganese ( Ⅱ )ingredient from Groundwater

Removal of Zn Ions from Mine Water by Coagulation Precipitation

In-depth Study of the Removal of Mn(II) by Fe(VI) Treatment and the Profound Influence of NOM on Floc Formation and Properties.

Removal of Iron and Manganese Element from Ocean Multimetallic Nodules Acid Leaching Solution

Feasibility study on heavy metal removal from mine water by using geological material

Study on the efficiency of manganese oxide-bearing manganese sand for removing Mn2+ from aqueous solution

Reclamation and reuse of mine water with high concentration of iron

Rapid Removal and Separation of Iron(ii) and Manganese(ii) from Micropolluted Water Using Magnetic Graphene Oxide.

A Stepwise Processing Strategy for Treating Manganese Residue and the Remediation of Hexavalent Chromium in Water and Soil by Manganese Residue-Derived (Fe,mn)c2o4

Application of Biological Process to Treat the Groundwater with High Concentration of Iron and Manganese

Efficient removal of heavy metals from aqueous solutions using Mn-doped FeOOH: Performance and mechanisms

Operational performance of biological treatment plant for iron and manganese removal

Removal of manganese, ferrous and antibiotics from groundwater simultaneously using peroxymonosulfate-assisted in-situ oxidation/coagulation integrated with ceramic membrane process

Efficient removal of heavy metal ions from wastewater and fixation of heavy metals in soil by manganese dioxide nanosorbents with tailored hollow mesoporous structure

Simultaneous Removal of Iron, Manganese and Ammonia from Groundwater: Upgrading of Waterworks in Northeast China

Synthesis of MnFe2O4@Mn-Co oxide core-shell nanoparticles and their excellent performance for heavy metal removal.