Preparation of Mn/Ti-modified zeolite and its performance for removing iron and manganese

Chunhui Zhang,Guirong Sun,Bingxu Quan,Xuelu Shi,Nan Xiao,Yizhen Zhang,Jinghua Tong,Wenqian Wang,Yuanhui Tang,Binhu Xiao,Chunyu Zhang
DOI: https://doi.org/10.1007/s11356-022-21309-4
IF: 5.8
2022-06-21
Environmental Science and Pollution Research
Abstract:Excessive iron and manganese presented in groundwater sources may cause harm to human health that needs to be solved urgently. This research aims to develop high-performance Mn/Ti-modified zeolites using sol-gel method and hydrothermal synthesis method to remove Fe 2+ and Mn 2+ simultaneously. The preparation parameters were optimized by response surface methodology, and the results confirmed that the optimal preparation conditions were as follows: mass ratio of MnO 2 -TiO 2 /zeolite = 1, hydrothermal temperature = 200°C, and calcination temperature = 500°C. The results of batch adsorption experiments showed that the best removal rate of Fe 2+ and Mn 2+ by modified zeolite materials which was prepared under the optimum conditions reached 96.8% and 94.4%, respectively, at which the saturated adsorption capacity was 2.80 mg/g and 1.86 mg/g. Through the adsorption kinetics, thermodynamics, internal diffusion, and isothermal adsorption analyses, it is confirmed that the adsorption process of Fe 2+ and Mn 2+ by the modified zeolite is mainly chemical adsorption. The results of the Weber-Morris internal diffusion model prove that internal diffusion is not the only step that controls the adsorption process. In addition, combined with the characterization of the composite-modified zeolite and the adsorption experimental study, it shows that there is an autocatalytic reaction in the adsorption process.
environmental sciences
What problem does this paper attempt to address?