Abstract:Heat treatment‐induced surface modification method was used to change the reactive groups on AFs. The number of ester groups greatly increased, which enhanced the reactivity of AFs in epoxy matrix. Meanwhile, the contact angle between AFs and epoxy droplet could be significantly decreased to 54.7° The large‐scale pretreatment and efficient surface activation of aramid fibers (AFs) before composite fabrication remains a major challenge. In this study, we developed a heat treatment–induced surface modification method to change the reactive groups on AFs. Results indicated that the O/C ratio and the number of ester groups on the AFs as well as the surface morphology of the AFs could be flexibly controlled using the heat treatment–induced surface modification method. Furthermore, the surface oxidation mechanism of the AFs changed from point oxidation to surface oxidation during heat treatment. As the heat‐treatment time increased, the crystallinity and tensile strength of the AF monofilament considerably increased. An optimal heat‐treatment time of 30 min was provided considering that long‐time heating (>30 min) would destroy the surface molecular chains. Under this optimal heat‐treatment time, the number of ester groups reached the maximum, which enhanced the reactivity of the AFs in the epoxy resin matrix. The interfacial shear strength between the AFs treated for 30 min and epoxy resin microdroplet increased by 12.64%, reaching as high as 18.17 MPa. Moreover, the contact angle between the AF monofilament and epoxy resin droplet reached a minimum value of 54.7°. Furthermore, the thickness of the interfacial bond layer between the AFs and epoxy resin reached 50–60 nm. These results provide effective theoretical guidance for the large‐scale application of AFs in composite materials.

Investigation on Atomic Oxygen Erosion Resistance of Self-Assembly Film at the Interphase of Carbon Fiber Composites

Progress in Self-assembly Mechanism and Functionalization of Films Assembled by(Poly)siloxane

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Preparation and Tribological Behaviors of an Amide-Containing Stratified Self-Assembled Monolayers on Silicon Surface

Improving the interfacial shear strength of carbon fibre and epoxy via mechanical interlocking effect

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Layer-by-Layer Self-Assembly Strategy for Surface Modification of Aramid Fibers to Enhance Interfacial Adhesion to Epoxy Resin

Construction of hierarchical “organic-inorganic” structure by self-assembly to enhance the interfacial properties of epoxy composites

Specificity of the E-P state of the SR Ca-ATPase: implications for the coupling mechanism.

Polyhedral Oligomeric Silsesquioxane Encountering Tannic Acid: A Mild and Efficient Strategy for Interface Modification on Carbon Fiber Composites

Learning from nature: constructing "rigid-soft" structure on carbon fibers surface by self-assembly to improve the performance of epoxy composites

Microtribologic Properties Of A Covalently Attached Nanostructured Self-Assembly Film Fabricated From Fullerene Carboxylic Acid And Diazoresin

Effects of oxidation‐induced aggregation structure transformation of aramid fiber on interfacial adhesion of epoxy resin

Corrosion Resistance and Formation Mechanism of Anodic Oxidation–Organic Structure Super‐Hydrophobic Self‐Assembled Film

Effect of electrochemical anodic oxidation modification on the interfacial properties of carbon fiber reinforced polyimide composites

Effect characteristics of ANFs/SiO2 layer self-assembly on the insulation properties of aramid/epoxy composites

Improvement of interface interaction and conductive anodic filament resistance through amphiphilic oligomeric silane

Improvement of corrosion resistance and mechanism analysis for self-assembled vinyltriethoxysilane (VS) films on low carbon steel using a novel chemical etching method

Strengthening and Toughening Epoxy Composites by Constructing MOF/CF Multi-Scale Reinforcement

Co-depositing bio-inspired tannic acid-aminopropyltriethoxysilane coating onto carbon fiber for excellent interfacial adhesion of epoxy composites