Abstract:The damage and failure mechanism of two-dimensional triaxially braided composite (2DTBC) under low-velocity impact and compression after impact (CAI) was experimentally investigated through tests with various impact energies (5, 10, 20 and 30 J). The low-velocity impact specimens were prepared according to the ASTM D7136 standard and tested using the Instron drop tower 9250HV with a hemispherical punch, and CAI tests were carried out on an Aowei PLD-250 fatigue machine following the ASTM D7137 standard. An infrared thermal imaging camera was employed to monitor the temperature distribution of the specimens during the low-velocity impact and CAI tests. Delamination damage of impacted specimens was characterized by an ICS-Ⅱ ultrasonic C-scanner. The relationship between impact energy and residual compression strength of 2DTBC after impact load was compared and analyzed. The evolution of the temperature field and its sensitivity against impact energy were discussed based on the infrared image data. Regarding the CAI tests, the global strain field was measured using the digital image correlation (DIC). Combining the thermal and deformation fields, and the optical failure images, the compression failure behavior of 2DTBC after impact of different energies were systematically investigated, validating the feasibility of infrared thermal imaging technology on characterizing the damage and failure behavior of braided composites. The experimental results show that the temperature field contours in low-velocity impact and CAI tests of braided composites are significantly correlated with braided architecture. The magnitude of temperature rise during the low-velocity impact test increases rapidly with the increase of impact energy, while the magnitude of temperature rise during the CAI test decreases with the increase of impact energy. Moreover, the maximum temperature rise is about 56.2 ºC in the 30 J low-velocity impact test. The delamination area is found to increase with the increase of impact energy, and the residual compression strength after impact decreases with the increase of impact energy. The residual compression strengths ratios are 90.9%, 82.2%, 73.8% and 65.8% for specimens after 5, 10, 20 and 30 J impacts, respectively. Through this study, we demonstrate that infrared thermal imaging camera can clearly capture the temperature rise phenomenon of composite specimens, which is caused by the releasing of fracture energy at the failure instant. More notably, the temperature contour can better reflect the damage location and failure characteristics than the global strain field.

Validity of Several Ndt Methods on Low Velocity Impact Damage Evaluation of 2-Dimensional Plain Woven C/Sic Composites

LOW-VELOCITY IMPACT CHARACTERISTICS AND COMPRESSIVE STRENGTH AFTER IMPACT OF PLAIN WOVEN CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Experimental Investigation of Low-velocity Impact and Residual Compressive Strength of Composites

Infrared Thermography and Acoustic Emission in 2D Plain Woven C/Sic Composites under Tensile-Tensile Fatigue Loading

Infrared Thermography For Non-Destructive Evaluation Of 2d C/Sic Composites Under Fatigue Loading

Investigation of Damage to Thick Composite Laminates under Low-Velocity Impact and Frequency-Sweep Vibration Loading Conditions

Experimental Investigation on Interlaminar and In-Plane Shear Damage Evolution of 2D C/SiC Composites Using Acoustic Emission and X-ray Computed Microtomography

High-velocity Impact Behaviors and Post-Impact Tension Performance of 2D-C/sic Composite Beams

Damage of 2D-Sic/sic Composites under Projectile Impact and Tensile Properties after Impact

Effect of Impact Energy on Damage Resistance and Mechanical Property of C/SiC Composites under Low Velocity Impact

Non-destructive Investigation of Quasi-Static Indentation Damage to C/SiC Composites and Its Effects on Compressive Properties

Couple effects of multi-impact damage and CAI capability on NCF composites

Damage and Failure Mechanism of Thin Composite Laminates under Low-Velocity Impact and Compression-after-impact Loading Conditions

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Damage Evolution and Real-Time Non-Destructive Evaluation of 2d Carbon-Fiber/Sic-Matrix Composites under Fatigue Loading

Experimental research on low-velocity impact and compression after impact of braided composites based on infrared thermal imaging

Damage and Failure of Laminated Carbon-Fiber-Reinforced Composite under Low-Velocity Impact

Impact behaviors and damage mechanisms of 2.5D woven composites: Experiment and simulation

Experimental Study on Low-Velocity Impact Performance of Carbon Fiber Reinforced Composite Laminates

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Micromechanisms and Characterization of Low-Velocity Impact Damage in 3D Woven Composites