Abstract:Abstract3D woven composites, due to the presence of through-thickness fibre-bridging, have the potential to improve damage tolerance and at the same time to reduce the manufacturing costs. However, ability to withstand damage depends on weave topology as well as geometry of individual tows. There is an extensive literature on damage tolerance of 2D prepreg laminates but limited work is reported on the damage tolerance of 3D weaves. In view of the recent interest in 3D woven composites from aerospace as well as non-aerospace sectors, this paper aims to provide an understanding of the impact damage resistance as well as damage tolerance of 3D woven composites. Four different 3D woven architectures, orthogonal, angle interlocked, layer-to-layer and modified layer-to-layer structures, have been produced under identical weaving conditions. Two additional structures, Unidirectional (UD) cross-ply and 2D plain weave, have been developed for comparison with 3D weaves. All the four 3D woven laminates have similar order of magnitude of damage area and damage width, but significantly lower than UD and 2D woven laminates. Damage Resistance, calculated as impact energy per unit damage area, has been shown to be significantly higher for 3D woven laminates. Rate of change of CAI strength with impact energy appears to be similar for all four 3D woven laminates as well as UD laminate; 2D woven laminate has higher rate of degradation with respect to impact energy. Undamaged compression strength has been shown to be a function of average tow waviness angle. Additionally, 3D weaves exhibit a critical damage size; below this size there is no appreciable reduction in compression strength. 3D woven laminates have also exhibited a degree of plasticity during compression whereas UD laminates fail instantly. The experimental work reported in this paper forms a foundation for systematic development of computational models for 3D woven architectures for damage tolerance.

Micromechanisms and Characterization of Low-Velocity Impact Damage in 3D Woven Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Impact behaviors and damage mechanisms of 2.5D woven composites: Experiment and simulation

Experimental Investigation on Low-Velocity Impact Performance of 3D Woven Textile Composites

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Experimental investigation on the damage accumulation mechanism of 3D orthogonal woven composites under Repeated low-velocity impacts

Transverse impact performance and finite element analysis of three‐dimensional woven tubular composite with different structures

Impact Response of 3D Orthogonal Woven Composites with Different Fiber Types

Numerical investigation of the low-velocity impact response of 3D orthogonal woven composite plates with preloads

Experimental investigation on high-velocity impact damage and compression after impact behavior of 2D and 3D textile composites

Experimental investigation on response and failure modes of 2D and 3D woven composites under low velocity impact

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

Low-velocity impact response of 3D woven solid structures for multi-scale applications: role of yarn maneuverability and weave architecture

Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

Effect of Yarn Reduction Types on the Mechanical Response and Damage Mechanism of 3D Woven Composites Subjected to Low-velocity Impact

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Evaluation of the low-velocity impact response of high-performance multi-axial warp-knitted flexible composites

Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres

An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites