Abstract:This study investigates a new semi-fixed-abrasive, ultra-fine finishing method for optical glass using a magneticcompound fluid (MCF) wheel. This MCF wheel generates a thin, uniform MCF slurry layer on the entire circumferentialsurface of a ring-shaped permanent magnet placed between two non-magnetic plates. The MCF slurry is composed ofnano-sized magnetite particles, micron-sized iron particles, several 10 μm-sized α-cellulose fibres and sub-micron-sizedabrasive particles that react to the magnetic field. Following modifications to the design of the MCF, experiments wereconducted to evaluate the performance of the modified wheel in spot-polishing fused silica glass. This paper describes themodifications to the MCF wheel and the experimental setup used to measure its performance. The improvement of themodified wheel over the unmodified wheel in terms of material removal and surfaces roughness is experimentallyconfirmed. The effects of the wheel rotational speed and the clearance between the wheel and the workpiece on materialremoval and the workpiece surface roughness are investigated. The polishing forces are measured, the structure of the MCFslurry is examined and the magnetic field distribution is analysed. A model of material removal in polishing with themodified MCF wheel is developed. The results indicate the following: (1) more material was removed, i.e., greater spotdepths, and better surfaces were obtained in the regions that were near the edges of the magnet; (2) the modified MCF wheelperformed much better than the unmodified wheel in terms of material removal and surface roughness, e.g., 3.1 μm vs. 1.7μm for the maximum spot depth, 0.04 mm3 vs. 0.0088 mm3 for the volume of material removed and Ra = 5.624 nm vs.14.67 nm for the surface roughness; (3) a better work surface and greater material removal were obtained with smallerworking clearances and higher wheel rotational speeds.

Ultrafine Surface Finishing of Fused Silica Glass Using MCF (magnetic Compound Fluid) Wheel

0705 Ultra Precision Surface Polishing of Fused Silica Using MCF Wheel Based on Prolongation of Wheel Life

Fundamental performance of Magnetic Compound Fluid (MCF) wheel in ultra-fine surface finishing of optical glass

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

C01 Fundamental Performance of MCF (magnetic Compound Fluid) Wheel in Optical Glass Polishing

Ultraprecision finishing process integrated ELID grinding and MRF for BK glass

Incined Magnetorheological Finishing and Its Path Controlling

C25 Fundamental Study on Precision Polishing of Sapphire Wafer Using MCF Wheel : Experimental Investigation of Wheel Working Life Based on Measurement of Polishing Temperature

Fundamental Performance of Magnetic Compound Fluid (MCF) Polishing Tool in Metal Surface Finishing

High-Efficiency Chemical-Mechanical Magnetorheological Finishing for Ultra-Smooth Single-Crystal Silicon

An Ultra-Precision Polishing Technique Using High-Velocity Abrasive Fluid

Nano-precision Polishing of CVD SiC Using MCF (magnetic Compound Fluid) Slurry

C08 Study on Surface Polishing Process Using Magnetic Compound Fluid (MCF)

The Effect of Magnetic Field Distribution on Material Removal in Magnetic Compound Fluid Wheel Polishing

Surface Roughness and Material-Removal Rate with Magnetorheological Finishing Without Subsurface Damage of the Surface

Magnetic Bingham Fluid-Assisted Deterministic Polishing for Super-Smooth Surfaces

Magnetorheological Finishing Technology for Polishing Super-Smooth Optical Surfaces

Material Removal and Micro-Roughness in Fluid-Assisted Smoothing of Reaction-Bonded Silicon Carbide Surfaces

Development of Ultrasonic Vibration-Assisted Magnetic Compound Fluid (MCF) Polishing Technology

Investigation into Chemo-Mechanical Fixed Abrasive Polishing of Fused Silica with the Assistance of Ultrasonic Vibration

Fundamental Performance of Magnetic Compound Fluid Polishing Liquid in Contact-Free Polishing of Metal Surface