Abstract:A new jet fuel surrogate was developed in this work by emulating real jet fuel properties including physical, gas phase chemical properties and threshold sooting index (TSI). An intelligent optimization methodology was proposed to calculate the species composition that inherently satisfies both the physical and chemical characteristics as well as sooting tendency. Eight properties were selected as the target properties for the jet fuel surrogate development, including liquid density, viscosity, surface tension, cetane number (CN), hydrogen carbon (H/C) ratio, molecular weight (MW), lower heating value (LHV) and TSI. As a result, the CN, H/C ratio, LHV, TSI and density of the new jet fuel surrogate are reproduced excellently with very little deviations within 3%. The averaged deviation of viscosity is −6.318% and the deviations of MW is 9.776%. As the highest deviation among all properties, the averaged deviation of surface tension is 11.76%. Based on the newly developed jet fuel surrogate, a skeletal jet fuel surrogate mechanism with 5 components including decalin, n-dodecane, iso-cetane, iso-octane and toluene was developed. The skeletal jet fuel surrogate mechanism was significantly compacted into 74 species and 189 reactions by describing the chemistries for the oxidation of large molecules C4–Cn and small H2/CO/C1 molecules respectively, which makes it practical to be used for 3-D engine combustion simulations. The validations of ignition delay times present reasonable agreement between experiment and predictions over a wide range of equivalence ratios (0.5–2.0) and pressures (8–30 atm), except for a shift of negative temperature coefficient (NTC) region towards higher temperatures at Φ = 1.5, 20 atm: in the simulation the NTC region is from 830 K to 950 K while in the experiment the NTC region is from 740 K to 890 K. The predicted species concentrations can reproduce the trend of the experimental data, especially for O2, CO and CO2. The simulated laminar flame speed at 400 K and 470 K are with absolute averaged deviations of 3.5% and 4.06% respectively. The constant volume spray and combustion validations are reasonably good. In the engine combustion validations, a multistep soot model was embedded into the new jet fuel surrogate mechanism. The predicted in-cylinder pressure can reproduce the experimental data, expect for small deviations after the peak pressure (the averaged deviation is around 6.2% after the peak pressure). The embedded soot model can well reproduce the trend of the experimental data. It can be concluded that this new jet fuel surrogate mechanism is compact and robust for the utilization in diesel engine combustion simulation.

Analysis on soot formation mechanism in direct-injection fuel engine

Asymptotic Analysis Soot Model and Experiment for a Directed Injection Engine

Assessment of Physical Soot Inception Model in Normal and Inverse Laminar Diffusion Flames

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Simulative Prediction of Ultrafine Particulate Matter Formation by Means of Different Pyrolysis Models

Development of a phenomenological soot model integrated with a reduced TRF-PAH mechanism for diesel engine application

3-D Simulation of Soot Formation in a Direct-Injection Diesel Engine Based on a Comprehensive Chemical Mechanism and Method of Moments

Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model

Large Eddy Simulation of Soot Formation in a Turbulent Lifted Flame with a Discretized Population Balance and a Reduced Kinetic Mechanism

Simulation and Experiment for Main Pollutions in Direct-injection Diesel Engine

Soot in Diesel Combustion Systems

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Modeling of Soot and Polycyclic Aromatic Hydrocarbons in Diesel Diffusion Combustion

Numerical Simulation and Experiment for Soot and NOx Emission in Diesel Engine

Numerical simulation of diesel combustion based on the soot detailed kinetic model

Growth of Polycyclic Aromatic Hydrocarbon and Soot Inception by in silico Simulation

Development Of A Reduced N-Decane/Alpha-Methylnaphthalene/Polycyclic Aromatic Hydrocarbon Mechanism And Its Application For Combustion And Soot Prediction

Characteristics and Kinetic Analysis of Soot Formation for Representative Species of Gasoline in Premixed Flame

Kinetic Modeling of Soot Formation with Detailed Chemistry and Physics in Premixed Hydrocarbon Flames

Development of two diesel surrogates focusing on the soot emission under engine-like conditions

Impact of multi-injection strategies on morphology, nanostructure and oxidation reactivity of diesel soot particles