Abstract:A new jet fuel surrogate was developed in this work by emulating real jet fuel properties including physical, gas phase chemical properties and threshold sooting index (TSI). An intelligent optimization methodology was proposed to calculate the species composition that inherently satisfies both the physical and chemical characteristics as well as sooting tendency. Eight properties were selected as the target properties for the jet fuel surrogate development, including liquid density, viscosity, surface tension, cetane number (CN), hydrogen carbon (H/C) ratio, molecular weight (MW), lower heating value (LHV) and TSI. As a result, the CN, H/C ratio, LHV, TSI and density of the new jet fuel surrogate are reproduced excellently with very little deviations within 3%. The averaged deviation of viscosity is −6.318% and the deviations of MW is 9.776%. As the highest deviation among all properties, the averaged deviation of surface tension is 11.76%. Based on the newly developed jet fuel surrogate, a skeletal jet fuel surrogate mechanism with 5 components including decalin, n-dodecane, iso-cetane, iso-octane and toluene was developed. The skeletal jet fuel surrogate mechanism was significantly compacted into 74 species and 189 reactions by describing the chemistries for the oxidation of large molecules C4–Cn and small H2/CO/C1 molecules respectively, which makes it practical to be used for 3-D engine combustion simulations. The validations of ignition delay times present reasonable agreement between experiment and predictions over a wide range of equivalence ratios (0.5–2.0) and pressures (8–30 atm), except for a shift of negative temperature coefficient (NTC) region towards higher temperatures at Φ = 1.5, 20 atm: in the simulation the NTC region is from 830 K to 950 K while in the experiment the NTC region is from 740 K to 890 K. The predicted species concentrations can reproduce the trend of the experimental data, especially for O2, CO and CO2. The simulated laminar flame speed at 400 K and 470 K are with absolute averaged deviations of 3.5% and 4.06% respectively. The constant volume spray and combustion validations are reasonably good. In the engine combustion validations, a multistep soot model was embedded into the new jet fuel surrogate mechanism. The predicted in-cylinder pressure can reproduce the experimental data, expect for small deviations after the peak pressure (the averaged deviation is around 6.2% after the peak pressure). The embedded soot model can well reproduce the trend of the experimental data. It can be concluded that this new jet fuel surrogate mechanism is compact and robust for the utilization in diesel engine combustion simulation.

Characteristics and Kinetic Analysis of Soot Formation for Representative Species of Gasoline in Premixed Flame

Kinetic Modeling of Soot Formation with Detailed Chemistry and Physics in Premixed Hydrocarbon Flames

Large Eddy Simulation of Soot Formation in a Turbulent Lifted Flame with a Discretized Population Balance and a Reduced Kinetic Mechanism

Experimental and kinetic modeling study on sooting tendencies of alkylbenzene isomers

Numerical simulation of diesel combustion based on the soot detailed kinetic model

Development of a New Jet Fuel Surrogate and Its Associated Reaction Mechanism Coupled with a Multistep Soot Model for Diesel Engine Combustion

Modeling of Soot and Polycyclic Aromatic Hydrocarbons in Diesel Diffusion Combustion

Experimental and simulation studies on flame characteristics and soot formation of C2H2 jet flames

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Growth of Polycyclic Aromatic Hydrocarbon and Soot Inception by in silico Simulation

A comparative study on soot and PAH formation of C10 naphthenic ring-containing species in laminar coflow diffusion flames

Experimental and Numerical Study of Soot Formation in Laminar Coflow Diffusion Flames of Gasoline/ethanol Blends

Comparative Study on Nascent Soot Formation Characteristics in Laminar Premixed Acetylene, Ethylene, and Ethane Flames

Soot in Diesel Combustion Systems

Experimental and modeling study of the effects of equivalence ratio on the benzene formation chemistry of one-dimensional laminar premixed n-heptane flames

Chemical Kinetic Model for Polycyclic Aromatic Hydrocarbon Formation During Gasoline Surrogate Fuel Combustion

Numerical Study of Soot Formation in Laminar Coflow Diffusion Flames of Methane Doped with Primary Reference Fuels

Modeling Diesel Spray Flame Liftoff, Sooting Tendency, and NOx Emissions Using Detailed Chemistry With Phenomenological Soot Model

Sooting Limits of Nonpremixed N-Heptane, N-Butanol, and Methyl Butanoate Flames: Experimental Determination and Mechanistic Analysis

Influence of Small-Molecule Oxygenous Fuel on Soot Precursor from n-Heptane Combustion

Study of soot formations in co-flow laminar diffusion flames of n-heptane and oxygenated aromatic biofuels from atmospheric condition to 2.3 bar