Abstract:<p>Improving sludge drying efficiency is of tremendous importance for public health, subsequent treatment, and comprehensive utilization. The interfacial thermal resistance between sludge and hot wall greatly limits the conductive drying performance. This study employed mechanical compression to decrease the interfacial thermal resistance. The drying kinetics and interfacial heat transfer behavior were investigated at mechanical loads of 25 to 200 kPa, temperatures of 120 to 210 °C, and sludge thicknesses of 1.0 to 3.0 mm, and were compared to those in the conventional drying process without mechanical load. The increase of temperature and mechanical load and the decrease of thickness improved drying rates. The drying experienced one warm-up period and two falling rate periods. The breakthrough of interfacial vapor film was responsible for the rapid rise in drying rates initially. At the thickness of 3.0 mm, 210 °C, and 100 kPa, the effective moisture diffusivity was increased by 2.5 times, and the apparent activation energy was reduced by 34% compared to the traditional process in the first falling rate period, implying that mechanical compression facilitated moisture migration and bound water desorption. The effective moisture diffusivity in the first falling rate period was increased by 35% compared to the diffusivity in the second falling rate period because of the pressure-driven flow. The decrease in drying rates was due to the transformation from the pressure-driven flow to vapor diffusion-limited flow in the first falling rate period. Additionally, this study provided essential information on developing a new sludge treatment method and establishing the drying model.</p>

Study of the apparent drying kinetics of papermaking and sewage water sludge

Contrastive and Experimental Study on Drying Characteristics of Sewage Sludge and Papermaking Sludge

Measurement and Modelling of Moisture Distribution and Water Binding Energy of Dredged Sludge

Experiment and kinetics model analysis on thin layer drying of paper mill sludge

Experimental study on combustion characteristics and its kinetics of paper mill sludge

Emission and Drying Kinetics of Paper Mill Sludge During Contact Drying Process

Study on pyrolysis kinetics of dried and wet sewage sludge

Comparative Study on Drying Characteristics of Sewage Sludge in Two Kinds of Indirect Heat Drying Equipment

Dynamic analysis on thin layer drying of dyeing sludge

Study on Combustion Kinetics of Coal Water Slurry Prepared with Sewage Sludge

Study on the Kinetics of Shell Powder Intensified Drying Process of Sludge

Drying Kinetics and Characteristics of Sewage Sludge/Rice Straw Mixture

Research on Sludge Drying Characteristics in a Double-Axis Paddle Dryer by Coupling Markov Chain and Penetration Theory

Study of Thermal Pyrolysis Knetics of Civil Sludge

Kinetics of Sludge Superheated Steam Drying and Optimization of Process Parameters

Study on the Thermogravimetric Kinetics of Dehydrated Sewage Sludge Regulated by Cationic Polyacrylamide and Sawdust

Enhancement of conductive drying of sewage sludge with mechanical compression: Drying kinetics, and interfacial heat transfer behavior

Effects of Air Parameters on Sewage Sludge Drying Characteristics and Regression Analyses of Drying Model Coefficients

Measurement and Simulation of the Contact Drying of Sewage Sludge in a Nara-type Paddle Dryer

Experimental and Theoretical Research on Agitated Contact Drying of Sewage Sludge in a Continuous Paddle Dryer

Study on Combustion Characteristics and Kinetics of Chongqing Municipal Sewage Sludge