Abstract:The precursors of the hydrotalcite (HT) and the Co-containing hydrotalcite-like compounds (HTLcs) using coprecipitation method and the mixed oxides of 2Mg/Al, Co/Mg/Al, 1.5Co/0.5Mg/Al and 2Co/Al using calcination of the precursors were prepared. Various measured methods, such as BET, XRD, TG-DTA, TPR, FT-IR, microcalorimetric adsorption and isopropanol catalytic reaction were used to study the physico-chemical properties of these samples. The results showed that the specific surface areas of the mixed oxides derived from the HT and HTLcs precursors are larger whereas decreased with the increase of the Co content in the sample. After the cobalt cations were introduced into the HT structure, due to the redox properties of the cobalt cations, the binding abilities of the HT layers attracted the interlayer anions were weakened, which thence enabled that the thermal decomposition temperature and the thermostability were descended, and after calcination, which resulted in the specific surface areas of the Co-containing mixed oxides are lower than that of the 2Mg/Al sample. In TPR process, the 2Mg/Al sample is not reduced, while the reduction of the Co-containing mixed oxide is via a path of Co3+ to Co2+ and then to Co-0. The surface of the mixed oxide was showed to contain the acidic sites and the basic sites, and with the change of the Co content in sample the acidic sites and the basic sites were gained some adjustments. The FT-IR indicated that on the surface of the Co-containing mixed oxide the Lewis acid sites were the main and the Bronsted acid sites were the less. The acetone selectivity of the isopropanol catalytic reaction was the highest, which indicated that the redox surface sites on these samples were in the dominant position. Due to the addition of Co and the enhancement of the Co content in these samples, the conversion of the isopropanol catalytic reaction was increased also.

Preparation of MgAlY-LDO solid base catalysts and their catalytic performance on the synthesis of isophorone via acetone condensation

YMgAl-LDO Synthesis and its Catalytic Performance for Preparation of Isophorone by Condensation of Acetone

Ce/MgAl mixed oxides derived from hydrotalcite LDH precursors as highly efficient catalysts for ketonization of carboxylic acid

Influence of surface acid-base properties of magnesium-aluminum composite oxides on acetone condensation reaction

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

Effect of One-Pot Rehydration Process on Surface Basicity and Catalytic Activity of MgyAl1-aREEaOx Catalyst for Aldol Condensation of Citral and Acetone

Influence of Y on the Performance of Mg-Al-Y Catalysts Via Hydrotalcite-Like Precursors for the Synthesis of Diethyl Carbonate from Ethyl Carbamate and Ethanol

Reconstructed La-, Y-, Ce-modified MgAl-hydrotalcite As a Solid Base Catalyst for Aldol Condensation: Investigation of Water Tolerance

Aldol Condensation of Acetone over Mg–Al Mixed Oxides Catalyst Prepared by a Citric Acid Route

Synthesis, Characterization And Isopropanol Catalytic Reaction Of Mg/Al,Co/Al And Co/Mg/Al Mixed Oxides From Hydrotalcite And Hydrotalcite-Like Precursors

Structure-Activity Correlations of Lino3/Mg4alo5.5 Catalysts for Glycerol Carbonate Synthesis from Glycerol and Dimethyl Carbonate

Preparation and Investigation on a Novel Nanostructured Magnetic Base Catalyst MgAl–OH-LDH/CoFe2O4

Effect of Doping M (m=mn, Y) into Ce0.50zr0.50o2 on the Properties of Mnox/Ce0.50-Zzr0.50-Zm2zoy/Al2o3 for Catalytic Combustion of Ethyl Acetate

Effect of Hydration on the Surface Basicity and Catalytic Activity of Mg-rare Earth Mixed Oxides for Aldol Condensation

Effect of Yttrium on Catalytic Performance of Y-doped TiO2 Catalysts for Propane Dehydrogenation

Catalytic Dehydration of 1,4‐butanediol over Mg−Yb Binary Oxides and the Mechanism Study

Synthesis of methyl acetoacetate from acetone and dimethyl carbonate over Mg/Al mixed oxides

Synthesis Of Mg-Zn-Al Hydrotalcites-Like And Catalytic Activities Of Their Composite Oxides

Preparation of YSZ-A1 20 3and catalytic performance of supported single palladium close coupled catalysts

Preparation of MgAl hydrotalcite based on in-situ generation method and application in Pt-based dehydrogenation catalyst

Production of Oxygen-containing Compounds Catalytic from Depolymerization of Calcium Lignosulphonate by Submicron-scale MgAl Solid Base