Abstract:Dy3+, Eu3+ co-doped glass ceramics (GCs) containing SrMoO4 crystalline phase were prepared by melt-curingcrystallization method. The most favorable heat treatment conditions for the glass ceramics were found to be 610 degrees C/2 h by differential scanning calorimetry (DSC), ultraviolet spectrophotometer (UV-Vis), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The best doping concentrations of Dy3+ and Eu3+ in this glass ceramic were 0.8 % and 0.6 %, concentration quenching caused by dipole-dipole interactions occurs when the content of rare earth ions in GCs continues to increase. The chromaticity coordinates of the Dy3+- Eu3+ co-doped glass ceramics changed from cool white light to warm white light with the addition of Eu3+ concentration. At the optimal doping concentration (0.8 % Dy3+-0.6 % Eu3+), the chromaticity coordinate of glass ceramics is (0.3972, 0.3331), and the related color temperature is 3047 K. The luminescence intensity can still reach about 80 % of room temperature at 180 degrees C, and its thermal quenching activation energy is 0.233 eV. This suggests that glass ceramics have excellent thermal stability. After adding an appropriate amount of Li+, the crystalline phase of the glass ceramics remained unchanged and the luminous intensity of the glass ceramics increased by a factor of about 1.4 in the same environment. The thermal quenching activation energy of the glass ceramic doped with 0.2 % Li+-0.8 % Dy3+-0.6 % Eu3+ was 0.344 eV. The experimental results indicate that GCs has potential application prospects in the field of solid-state lighting.

Research on the Photometry and Corrosion Characteristics of Rare Earth Iodides in Ceramic Metal Halide Lamps

Corrosion effects of MIx on ceramic arc tubes of metal halide lamps

Review on the Inner Wall Corrosion in Arc Tube of Ceramic Metal Halide Lamp

Research and Development of Low Wattage Ceramic Metal Halide Lamps

Recent Progress in the Technology of Ceramic Metal Halide Lamps

Progresses in Research on Ceramic Metal Halide Lamps

Glass-ceramic Phosphors for Solid State Lighting: A Review

Research on the Dimming Characteristics of Small and Medium Wattage Ceramic Metal Halide Lamps

The Technology Development and Research of Rare - earth Lamp Phosphor (Ⅲ)

Study of Corrosion Resistance and Degradation Mechanisms in LiTiO2-Li2TiO3 Ceramic

Effect of Li+ on Luminescence Properties and Thermal Stability of Glass Ceramics Containing SrMoO4

Cathodoluminescence evaluation of the degradation of Mg, Ca and Dy Co-doped BaTiO3 Ceramics

Comparison Research of Street Lamps: Characteristic Parameters and Lighting Performance of Light-Emitting Diodes, High Pressure Sodium Lamps and Ceramic Discharge Metal Halide Lamps

Strength and weakness of rare earths based phosphors: Strategies to replace critical raw materials

Dimming properties of medium and small wattage ceramic metal halide lamps

Recent research activities on functional ceramics for insulator, breeder and optical sensing systems in fusion reactors

An Advanced Ceramic Material for Internal Insulation Used in Gas-Insulated HVDC Apparatus

Effects of Frequency and Current on the Electrode Temperature of HID Lamps

Design, synthesis, and thermal stability of rare earth luminescent materials

OPTICAL CHARACTERIZATION OF RARE EARTHS (ce~(3+),tb~(3+),pr~(3+)) DOPED HEAVY METAL GERMANATE GLASSES BEFORE AND AFTER IRRADIATION

On-line Monitoring, Data Analysis for Electrolytic Corrosion of ±800 Kv High Voltage Direct Current Insulators