Abstract:It was possible to create superhydrophobic nickel-cobalt-plated copper mesh with good stability, oil-water separation capabilities, and corrosion resistance by combining constant-current electrodeposition with low-surface-energy modification. The rough structure needed for superhydrophobic properties is provided by the micro- and nanoscale nickel-cobalt spherical structure. The copper mesh with superhydrophobicity was created by modification with an ethanol stearate solution, and the water contact angle (WCA) of the superhydrophobic nickel-cobalt copper mesh was 158° at the ideal electrodeposition parameter of 30 mA/cm 2 for 35 min. The superhydrophobic Ni-Co plating exhibited strong corrosion resistance in a 3.5 wt.% NaCl solution, with a protection efficacy of 98.65% and a self-corrosion current density of 2.809×10 -7 A/cm 2 , and the contact angle of the plating was 150° after 48 h of immersion, and it still outperformed the substrate in terms of corrosion resistance. The superhydrophobic plated Ni-Co copper mesh had good chemical and mechanical stability and good bonding with the substrate. For various oil-water mixtures, such as hexyl hydride-water, the superhydrophobic copper mesh also performed well in oil-water separation, with high efficiency (93.6%-97.9%) and high flux (20,000-60,000 L·m -2 ·h -1 ). The separation efficiency of hexyl hydride-water mixtures remained greater than 96% even after 50 cycles of use, with stable reusability.

Superhydrophobic Sol-Gel Films Based on Copper Wafer and Its Anti-Corrosive Properties

Fabrication of Superhydrophobic Copper Meshes Via Simply Soaking for Oil/ Water Separation

Fabrication of Super Hydrophobic Surfaces on Copper by Solution-immersion

Fabrication and anti-corrosion property of superhydrophobic hybrid film on copper surface and its formation mechanism

Super-hydrophobic film fabricated on Copper with electro-deposition method and its corrosion resistance

Preparation of Superhydrophobic Surfaces Based on Copper Mesh Substrates and Its Application Performance

Preparation and anti-corrosion performances of grass-like microstructured superhydrophobic surface on copper via solution-immersion

Facile fabrication of a flower-like superhydrophobic copper surface with superior corrosion resistance

Fabrication of Superhydrophobic Coatings on Copper Substrate

A novel route to fabricate superhydrophobic surface on copper substrate without additional low surface energy materials

Robust Superhydrophobic SiO2/polydimethylsiloxane Films Coated on Mild Steel for Corrosion Protection

Fabricated Super-Hydrophobic Film with Potentiostatic Electrolysis Method on Copper for Corrosion Protection

Green Approach to Fabrication of a Super-Hydrophobic Film on Copper and the Consequent Corrosion Resistance

An Anti-Corrosion Superhydrophobic Copper Surface Fabricated by Milling and Chemical Deposition

Preparation of corrosion-resistant superhydrophobic Ni-Co coatings on copper mesh and oil-water separation properties

Controllable Growth of Durable Superhydrophobic Coatings on a Copper Substrate Via Electrodeposition.

Super-Hydrophobic Film Prepared with Reduced Graphene Sheets and Its Application As Corrosion Barrier to Copper

Robust superhydrophobic coating fabricated on copper mesh with anti-corrosion property for oil/water separation

High Stability Performance of Superhydrophobic Modified Fluorinated Graphene Films on Copper Alloy Substrates

Electrodeposition of Superhydrophobic Cu Film on Active Substrate from Deep Eutectic Solvent

A Fast and Green Method Based on Electroplating from Ethaline Electrolyte to Fabricate Superhydrophobic Surface for Corrosion Protection of Copper