Abstract:The accumulation of ice on electrical construction works not only leads to the reduced efficiency of power supply and heat exchangers, but also increases the energy losses and even brings about serious disasters. Therefore, it is essential to reduce or eliminate the issue of ice accumulation on metal constructions. Nowadays, superhydrophobic surfaces have received lots of attentions for their outstanding hydrophobicity. In this study, Cu(OH) 2 nano grass was firstly in-situ constructed on copper surface via simple anodization, then superhydrophobic CuO nano needles were obtained after the dehydration of Cu(OH) 2 and modification with fluoro-alkyl silanes. The results showed that when the anodic oxidation temperature was 20 °C and the current density was 2 mA·cm −2 , nano-needle-like multistage micro-nano structures can be obtained. The as-prepared superhydrophobic surface showed the water contact angle as large as 162° and sliding angle lower to 4°. Additionally, the as-prepared superhydrophobic surface displayed outstanding anti-icing property, delaying icing substantially even under − 10 °C environment regardless of droplet volume and type. Moreover, it also revealed good anti-corrosion property with a corrosion current density of 2.2 × 10 −8 Ω·cm 2 and the corrosion resistance of 1.55 × 10 6 Ω·cm 2 which is about three order of magnitudes than that of bare copper. We prospect that this easily prepared surface can provide a solution of anti-icing and anti-corrosion for electrical construction works and large-scale metals.

Facile fabrication of a flower-like superhydrophobic copper surface with superior corrosion resistance

A Fast and Green Method Based on Electroplating from Ethaline Electrolyte to Fabricate Superhydrophobic Surface for Corrosion Protection of Copper

A novel route to fabricate superhydrophobic surface on copper substrate without additional low surface energy materials

Super-hydrophobic film fabricated on Copper with electro-deposition method and its corrosion resistance

An Anti-Corrosion Superhydrophobic Copper Surface Fabricated by Milling and Chemical Deposition

Facile Fabrication of Durable Copper-Based Superhydrophobic Surfaces via Electrodeposition

Fabricated Super-Hydrophobic Film with Potentiostatic Electrolysis Method on Copper for Corrosion Protection

Preparation and anti-corrosion performances of grass-like microstructured superhydrophobic surface on copper via solution-immersion

Fabrication and anti-corrosion property of superhydrophobic hybrid film on copper surface and its formation mechanism

Preparation of Superhydrophobic Surfaces Based on Copper Mesh Substrates and Its Application Performance

Achieving hierarchical structure with superhydrophobicity and enhanced anti-corrosion via electrochemical etching and chemical vapor deposition

In-situ fabrication of superhydrophobic surface on copper with excellent anti-icing and anti-corrosion properties

Superhydrophobic surfaces created by a one-step solution-immersion process and their drag-reduction effect on water

Preparation of a Cu Surface with the Hierarchical Structure of a Lotus Leaf Via Electroplating and Its Superhydrophobicity

A General Approach for Fabrication of Superhydrophobic and Superamphiphobic Surfaces

Superhydrophobic epoxy coating modified by fluorographene used for anti-corrosion and self-cleaning

Construction of Super - Hydrophobic Copper Alloy Surface by One - Step Mixed Solution Immersion Method

Preparation of corrosion-resistant superhydrophobic Ni-Co coatings on copper mesh and oil-water separation properties

Fluorine-free superhydrophobic coating with mechanical interlocking and high corrosion resistance

Mechanically Strong Superhydrophobic Coating Based on Cu–SiC Electrochemical Composite

Wettability of Stearic Acid Modified Chrome Oxide Layer on Copper Substrate