Abstract:We have fabricated an improved organic photovoltaic (OPV) cell in which organic heterointerface layer is inserted between indium-tin-oxide (ITO) anode and copper-phthalocyanine (CuPc) donor layer in the conventional OPV cell of ITO/CuPc/fullerene (C60)/bathophenanthroline (Bphen)/Al to enhance the power conversion efficiency (PCE) and fill factor (FF). The inserted ITO-buffer layer consists of electron-transporting layer (ETL) and hole-transporting layer (HTL). We have changed the ETL and HTL materials variously and also changed their layer thickness variously. It is confirmed that ETL materials with higher LUMO level than the work function of ITO give low PCE and FF. All the double layer buffers give higher PCE than a single layer buffer of TAPC. The highest PCE of 1.67% and FF of 0.57% are obtained from an ITO buffer consisted of 3nm thick ETL of hexadecafkluoro-copper-phthalocyanine (F16CuPc) and 3nm thick HTL of 1,1-bis-(4-methyl-phenyl)-aminophenylcyclohexane (TAPC). This PCE is 1.64 times higher than PCE of the cell without ITO buffer and 2.98 times higher than PCE of the cell with single layer ITO buffer of TAPC. PCE is found to increase with increasing energy difference (ΔE) between the HOMO level of HTL and LUMO level of F16CuPc in a range of ΔE<0.6eV. From the ΔE dependence of PCE, it is suggested that electrons moved from ITO to the LUMO level of the electron-transporting F16CuPc are recombined, at the F16CuPc/HTL-interface, with holes transported from CuPc to the HOMO level of HTL in the double layer ITO buffer ETL, leading to efficient extraction of holes photo-generated in CuPc donor layer.

Mechanisms of the Improved Organic Photovoltaic Performance by Using Electron-Transporting Cupc Derivative As Anode Modifying Layer

Improved Photovoltaic Characteristics of Organic Cells with Heterointerface Layer As a Hole-Extraction Layer Inserted Between ITO Anode and Donor Layer

Organic photovoltaic cell employing organic heterojunction as buffer layer

Improving Efficiency of Organic Photovoltaic Cells with Pentacene-Doped Cupc Layer

Significant Enhancement in Built-In Potential and Charge Carrier Collection of Organic Solar Cells Using 4-(5-hexylthiophene-2-yl)-2,6-bis(5-trifluoromethyl)thiophen-2-yl)pyridi Ne As A Cathode Buffer Layer

Effect of buffer layers on the performance of organic photovoltaic cells based on copper phthalocyanine and C60

Organic Solar Cells With Remarkable Enhanced Efficiency By Using A Cui Buffer To Control The Molecular Orientation And Modify The Anode

Boosting Electron Extraction in Polymer Solar Cells by Introducing a N-Type Organic Semiconductor Interface Layer

Improvement in Power Conversion Efficiency and Long-Term Lifetime of Organic Photovoltaic Cells by Using Bathophenanthroline/molybdenum Oxide As Compound Cathode Buffer Layer

Improvement of Both Efficiency and Working Lifetime in Organic Photovoltaic Devices by Using Bathophenanthroline/Tin(Iv) Phthalocyanine Dichloride As Bilayer Exciton Blocking Layers

Orienting the Microstructure Evolution of Copper Phthalocyanine As an Anode Interlayer in Inverted Polymer Solar Cells for High Performance.

Investigation on the small molecular organic solar cells with PEDOT:PSS/ZnPc double anode buffer layer system

The Study on Organic Solar Cells Based on Bathocuproine As an Exciton Blocking Layer

Organic Photovoltaic Cells with Improved Performance Using Bathophenanthroline As a Buffer Layer

Ultrathin Anode Buffer Layer for Enhancing Performance of Polymer Solar Cells

Boosted Electron Transport and Enlarged Built-In Potential by Eliminating the Interface Barrier in Organic Solar Cells.

The Improvement in Organic Photovoltaic Response by Inserting an Interlayer Between MoO3 and Mixed Layer of C60:5 Wt% TAPC

Organic Photovoltaic Cells Based on TPBi As a Cathode Buffer Layer

Enhanced Performance And Stability Of Polymer Solar Cells By In Situ Formed Alox Passivation And Doping

An Inorganic Molecule-Induced Electron Transfer Complex for Highly Efficient Organic Solar Cells

Employing Inorganic/Organic Hybrid Interface Layer to Improve Electron Transfer for Inverted Polymer Solar Cells