Abstract:A finite control set model predictive control (FCS-MPC) based controller has a fast dynamic response and robustness. furthermore, the presence of a cost function gives designers a degree of freedom to include system control targets, constraints and system non-linearities. On the other hand, Multilevel inverter (MI) topologies are becoming a strong alternative in distributed power generation system (DPGS), among these topologies is the three-phase three-level NPC (TTLNPC) inverter. Generally, to properly operate this topology, the applied current control ensures the achievement of two main objectives. First, the output current must be controlled to track its reference. Second, the two dc-link capacitor voltages have to be equal and balanced. In this paper, FCS-MPC is proposed to control the TTLNPC inverter based parallel active power filter (APF) adopted to connect a photovoltaic system (PVS) to the grid and perform a harmonic mitigation. The proposed FCS-MPC exploit the model of the system to predict the future values of the inverter currents by selecting the best voltage vector that aims to minimize a predefined cost function. Instead of using the popular redundant vectors algorithms to balance the two-split dc-link capacitor voltages, another term will be added to the expression of the cost function to achieve this goal. The PV panel is coupled directly to the inverter without DC/DC converter, the P&O MPPT algorithm is responsible to generate the capacitor reference voltage whatever the climatic conditions are. Simulations using Matlab/Simulink were performed to prove the efficiency of the proposed technique to mitigate the grid current harmonics, and to ensure a continuous power injection and perform a load power sharing.

The application of three level NPC converter for wind power generator

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

Three-level Inverter and Induction Machine's SVV Control Technology and Its Simulation

Investigation on Open Winding Pmsg System with the Integration of Full Controlled and Uncontrolled Converter

A Novel Control Scheme for Three-Level NPC Back-to-back Converter

Three-level NPC voltage source converter based direct power control of the doubly fed induction generator at low constant switching frequency

A Three-Level Neutral-Point-Clamped Converter Based Standalone Wind Energy Conversion System Controlled with a New Simplified Line-to-Line Space Vector Modulation

Application of Modular Multilevel Converter in Medium Voltage High Power Permanent Magnet Synchronous Generator Wind Energy Conversion Systems

Medium-Voltage Wind Power Converter Based on Three-Level Neutral Point Clamped Topology

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Model Predictive Control for Three-Phase Three-Level NPC Inverter Based APF Interfacing Single Stage Photovoltaic System to the Grid

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

Investigation on Open-Winding PMSG System Fed by Three Level NPC Converter and Diode Converter

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

Integrated Control Scheme for Three-Level NPC Based Dual-PWM Converter

Low Voltage Ride-Through of High Power DFIG Wind Turbine Using Three-Level NPC Converters

Direct Power and Torque Control for Three-Level NPC Based PWM Ac/dc/ac Converter

A high efficient 33 level inverter for electric vehicle application using PMSM

PSO-enhanced discrete-time integrated sliding mode-based control of three-level NPC converter for grid-connected PV-FC distributed generation system

An Enhanced Virtual Space Vector Modulation Scheme of Three-Level NPC Converters for More-Electric-Aircraft Applications