Optical Microfibers and Nanofibers: A Tutorial

Limin Tong,Fei Zi,Xin Guo,Jingyi Lou

DOI: https://doi.org/10.1016/j.optcom.2012.07.068

IF: 2.4

2012-01-01

Optics Communications

Abstract:In this paper, we present a tutorial introduction to optical microfibers and nanofibers regarding their optical properties, fabrication and applications, with a brief outlook into future trends in this area.

What problem does this paper attempt to address?

Nanofibers and Nanowires Tutorial Talk

Tong, Limin

2011-01-01

Abstract:This paper discusses the following: nanowire fabrication; nanowire manipulation; optics in nanowires; and nanowire photonic components and devices.
Optical microfibers and their applications

Xiao-Qin WU,Yi-Pei WANG,Li-Min TONG

DOI: https://doi.org/10.7693/wl20150602

2015-01-01

Physics

Abstract:Optical microfibers and nanofibers have diameters close to or smaller than the wavelength of the guided light. Fabricated by physical drawing of glass or polymer materials, these tiny fibers show excellent surface smoothness and diameter uniformity, high mechanical strength, tight optical confinement, strong evanescent field, significant surface field enhancement, and large and abnormal waveguide dispersion, which bestow them with a variety of applications in fields ranging from optical communication, laser technology, sensors, nonlinear optics, and quantum op-tics.
Brief Introduction to Optical Microfibers and Nanofibers

Limin Tong

DOI: https://doi.org/10.1007/s12200-009-0073-1

2010-01-01

Frontiers of Optoelectronics in China

Abstract:When its diameter goes close to or below the wavelength of the guided light, an optical microfiber/nanofiber (MNF) exhibits favorable properties such as tight optical confinement, strong near-field interaction, and excellent mechanical strength, which offers plenty of choices for combining a variety of functionalized materials ranging from semiconductors and metals to laser dyes; opens up plenty of opportunities for developing microphotonic or nanophotonic devices; and inspires new opportunities for near-field optics, nonlinear optics, and quantum optics.
Recent Progress in Optical Micro/Nanofiber Technology

Tong Limin

DOI: https://doi.org/10.3788/AOS202242.1706001

2022-01-01

Acta Optica Sinica

Abstract:Optical micro/nanofihers are one-dimensional free-standing waveguiding structures with diameters close to or smaller than the vacuum wavelength of the guided light. Fabricated by physically drawing glass fiber at high temperature these fibers show excellent surface smoothness and diameter uniformity, high mechanical strength, tight optical confinement, strong evanescent field, evident surface field enhancement, and large wavelength/diameter-dependent waveguide dispersion, especially much lower waveguiding loss than all other micro/nanowaveguides with similar geometries. These merits offer them great potentials in applications ranging from near field optical coupling, optical sensing, atom optics, nonlinear optics, laser technology, and optomechanics. In this review, starting from the basic waveguiding properties of optical micro/nanofihers, we introduce our recent progress in high precision fiber fabrication and micro/nanofiber-based near field coupling, optical sensors, and nonlinear optical devices. At same time, we also mention relative works from other groups. Finally, we conclude this article with a brief outlook.
Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Li-Min TONG,Xin-Yun PAN

DOI: https://doi.org/10.3321/j.issn:0379-4148.2007.08.008

2007-01-01

Physics

Abstract:By means of high-temperature physical drawing, glasses can be directly drawn into subwavelength-or nanometer-diameter fibers. As-fabricated nanofibers show excellent diameter uniformity and surface smoothness for low-loss optical wave guiding, and may exhibit a series of interesting properties such as tight optical confinement, evanescent guidance and high waveguide dispersion. These fibers provide promising building blocks for photonic applications in optical communications, optical sensing and nonlinear optics.
Microfiber Optical Sensors: A Review

Jingyi Lou,Yipei Wang,Limin Tong

DOI: https://doi.org/10.3390/s140405823

IF: 3.9

2014-01-01

Sensors

Abstract:With diameter close to or below the wavelength of guided light and high index contrast between the fiber core and the surrounding, an optical microfiber shows a variety of interesting waveguiding properties, including widely tailorable optical confinement, evanescent fields and waveguide dispersion. Among various microfiber applications, optical sensing has been attracting increasing research interest due to its possibilities of realizing miniaturized fiber optic sensors with small footprint, high sensitivity, fast response, high flexibility and low optical power consumption. Here we review recent progress in microfiber optical sensors regarding their fabrication, waveguide properties and sensing applications. Typical microfiber-based sensing structures, including biconical tapers, optical gratings, circular cavities, Mach-Zehnder interferometers and functionally coated/doped microfibers, are summarized. Categorized by sensing structures, microfiber optical sensors for refractive index, concentration, temperature, humidity, strain and current measurement in gas or liquid environments are reviewed. Finally, we conclude with an outlook for challenges and opportunities of microfiber optical sensors.
Micro/Nanofibre Optical Sensors: Challenges and Prospects

Limin Tong

DOI: https://doi.org/10.3390/s18030903

IF: 3.9

2018-01-01

Sensors

Abstract:Micro/nanofibres (MNFs) are optical fibres with diameters close to or below the vacuum wavelength of visible or near-infrared light. Due to its wavelength- or sub-wavelength scale diameter and relatively large index contrast between the core and cladding, an MNF can offer engineerable waveguiding properties including optical confinement, fractional evanescent fields and surface intensity, which is very attractive to optical sensing on the micro and nanometer scale. In particular, the waveguided low-loss tightly confined large fractional evanescent fields, enabled by atomic level surface roughness and extraordinary geometric and material uniformity in a glass MNF, is one of its most prominent merits in realizing optical sensing with high sensitivity and great versatility. Meanwhile, the mesoporous matrix and small diameter of a polymer MNF, make it an excellent host fibre for functional materials for fast-response optical sensing. In this tutorial, we first introduce the basics of MNF optics and MNF optical sensors, and review the progress and current status of this field. Then, we discuss challenges and prospects of MNF sensors to some extent, with several clues for future studies. Finally, we conclude with a brief outlook for MNF optical sensors.
Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Limin Tong,Eric Mazur

DOI: https://doi.org/10.1016/j.jnoncrysol.2006.10.090

IF: 4.458

2007-01-01

Journal of Non-Crystalline Solids

Abstract:Subwavelength- and nanometer-diameter glass nanofibers have been fabricated using a high-temperature taper-drawing process. As-drawn nanofibers show extraordinary uniformities in terms of diameter variation and surface roughness and are suitable for single-mode optical wave guiding. Measured optical losses of these nanofibers are typically below 0.1dB/mm. Photonic devices such as linear waveguides, optical couplers and microrings assembled with nanofibers are also demonstrated. Our results show that taper-drawn glass nanofibers are promising building blocks for micro- and nano-scale photonic devices.
Nanofibers and Nanowires and Nanowires

Limin Tong

DOI: https://doi.org/10.1364/ecoc.2011.tu.3.lecervin.1

2011-01-01

Abstract:Abstract (100 Word Limit): When its size goes down to the wavelength of the guided light, an optical nanofibre/nanowire exhibits interesting properties such as tight optical confinement, strong near-field interaction, abnormal dispersion, enhanced surface effects and excellent mechanical flexibilities, which opens opportunities for combining waveguide optics with near-field optics, nonlinear optics, plasmonics, quantum optics and optomechanics on the nanoscale and low power level, and intrigues a variety of novel nanophotonic components/devices. This talk reviews the principles and technological applications of optical nanofibres and nanowires. Future applications of these one-dimensional building blocks for optical communications and sensing are also discussed. Presenter Bio (100 Word Limit): Limin Tong received his BS and MSc degrees in Physics and PhD degree in Materials Science and Engineering from Zhejiang University, China, in 1991, 1994 and 1997, respectively. In 1997 he joined the Department of Physics, Zhejiang University, China as an assistant professor. In 2001 he joined Mazur group, Harvard University as a visiting scientist, and returned Zhejiang University in 2004. He is currently a professor and director of Department of Optical Engineering at Zhejiang University. His research interest has been in the area of nanophotonics and fibre optics.
Micro/nanofiber optical sensors

Lei Zhang,Jingyi Lou,Limin Tong

DOI: https://doi.org/10.1007/s13320-010-0022-z

2010-01-01

Abstract:As a low-dimensional optical fiber with diameter close to or below the wavelength of light, optical micro/nanofiber (MNF) offers a number of favorable properties for optical sensing, which have been exploited in a variety of sensing applications, including physical, chemical, and biological sensors. In this paper we review the principles and applications of silica, glass, and polymer optical micro/nanofibers for physical and chemical sensing.
Micro/Nanofiber and the Application Exploration Chinese Full Text

童利民

DOI: https://doi.org/10.3969/j.issn.0368-6396.2023.02.008

IF: 56.9

2023-01-01

Science

Abstract:As a one-dimensional micro/nanowaveguide with diameter close to the wavelength of the guided light, an optical micro/nanofiber shows characteristics of uniform diameter, smooth surface, low loss, high mechanical strength, tight optical confinement, and large fractional evanescent waves.
Nanophotonics And Nanofibers

Limin Tong,Eric Mazur

DOI: https://doi.org/10.1016/B978-012374216-2.50040-5

2008-01-01

Abstract:Nanophotonics is a fusion of photonics and nanotechnology, and is deﬁned as nanoscale optical science and technology that includes nanoscale conﬁnement of radiation, nanoscale conﬁnement of matter, and nanoscale photoprocesses for nanofabrication [1-3]. While photonics has been widely used for ﬁber-optic data communication for decades, the application of nanotechnology for optical communication is an emerging technology. The basic motivation for incorporating photonics with nanotechnology is spurred by the requirement of increased inte-gration of photonic devices for a variety of applications such as higher data transmission rates, faster response, lower energy consumption, and denser data storage [2]. For example, to reach an optical data transmission rate as high as lOTb/s, the size of photonic matrix switching devices should be reduced to 100-nm scale [4].Historically, the nanotechnology was ﬁrst …
Optical Micro/nanofiber Enabled Tactile Sensors and Soft Actuators: A Review

Lei Zhang,Yuqi Zhen,Limin Tong

DOI: https://doi.org/10.29026/oes.2024.240005

2024-01-01

Opto-Electronic Science

Abstract:As a combination of fiber optics and nanotechnology, optical micro/nanofiber (MNF) is considered as an important multifunctional building block for fabricating various miniaturized photonic devices. With the rapid progress in flexible opto-electronics, MNF has been emerging as a promising candidate for assembling tactile sensors and soft actuators owing to its unique optical and mechanical properties. This review discusses the advances in MNF enabled tactile sensors and soft actuators, specifically, focusing on the latest research results over the past 5 years and the applications in health monitoring, human-machine interfaces, and robotics. Future prospects and challenges in developing flexible MNF devices are also presented.
Microfiber and Nanofiber Optics: Principles and Applications

Hubiao Fang,Yu Xie,Zipei Yuan,Dawei Cai,Jianbin Zhang,Xin Guo,Limin Tong

DOI: https://doi.org/10.1364/acp.2009.thaa2

2012-01-01

Abstract:Optical micro/nanofibers (MNFs) taper-drawn from silica fibers possess intriguing optical and mechanical properties. Recently, MNF array or MNFs with identical geometries have been attracting more and more attention, however, current fabrication technique can draw only one MNF at a time, with a low drawing speed (typically 0.1 mm/s) and a complicated process for high-precision control, making it inefficient in fabricating multiple MNFs. Here, we propose a parallel-fabrication approach to simultaneously drawing multiple (up to 20) MNFs with almost identical geometries. For fiber diameter larger than 500 nm, measured optical transmittances of all as-drawn MNFs exceed 96.7% at 1550-nm wavelength, with a diameter deviation within 5%. Our results pave a way towards high-yield fabrication of MNFs that may find applications from MNF-based optical sensors, optical manipulation to fiber-to-chip interconnection.
Silica Nanofibers and Subwavelength-Diameter Fibers

Limin Tong,Eric Mazur

DOI: https://doi.org/10.1016/b978-012369406-5/50013-8

2007-01-01

Abstract:Air-clad silica nanofibers, named for their submicrometer diameters, have a large core–cladding index contrast for efficient optical confinement. For single-mode operation, these fibers are usually thinner than the wavelength of the light they carry and are therefore also called sub wavelength-diameter fibers. The small diameter of a nanofiber and the large core–cladding index contrast yield a number of interesting optical properties such as tight optical confinement, large evanescent fields, strong field enhancement, and large waveguide dispersions. A few techniques can be used to fabricate silica nanowires or nanofibers such as photo or electron beam lithography, chemical growth, and taper drawing of optical fibers. The taper-drawing method exhibits simplicity in fabrication and also the ability to fabricate nanofibers with extraordinary diameter uniformities, atomic-level surface smoothness, and long length that are difficult to achieve by any other means. The nanofibers obtained with the two-step taper-drawing techniques consist of three parts—a millimeters-long taper that is connected to the starting microfiber, a uniform nanofiber with a length up to tens of millimeters, and an abruptly tapered end that is usually several to tens of micrometers in length.
Novel micro/nano-scale photonic devices

Qi-Huang GONG,Xiao-Yong HU,Li-Min TONG

2010-01-01

Physics

Abstract:Photonic crystals and nanofibers,two kinds of important photonic materials,possess the unique feature of being able to control the propagation of photons.They are thus an important platform for the study of the interaction of photons and matter on the mesoscopic scale,as well as an important basis for the realization of novel micro/nano-scale photonic devices.Progress in the research on ultrafast low-power photonic crystal all-optical switching,nanofiber sensors,interferometers,and hybrid dielectric-metallic nanowire components will be reviewed.
Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Kang Yi,Liu KeYing,Xie Yu,Gong Jue,Yao Ni,Fang Wei,Guo Xin,Zhang Lei,Wang Pan,Tong LiMin

DOI: https://doi.org/10.1360/sspma-2020-0027

2020-01-01

Abstract:Owing to their favorable properties including small sizes, tight optical confinement, large fractional evanescent fields, and low waveguiding losses, optical micro-/nanofibers have attracted broad research interest and technological applications in recent years, in which the precision in micro-/nanofiber fabrication is critical to determine their waveguiding properties and performances. Here, we firstly introduce the principles of high-temperature taper drawing of glass fibers. Next, we review typical fabrication methods including flame-heated manual drawing approach, flame-heated mechanical drawing technique, electric-heated mechanical drawing technique and laser-heated mechanical drawing technique. Cons and pros of the above-mentioned techniques are discussed, followed by a brief introduction to the fabrication of polymer micro-/nanofibers. Thirdly, we introduce the principle and techniques of high-precision diameter control in glass micro-/nanofiber fabrication based on a in-situ feedback from the cutoff of high-order waveguiding modes, which can offer a diameter precision down to nanometer level. In addition, several techniques for diameter measurement of a micro-/nanofiber are also introduced. Finally, we end the review with a brief summary in micro-/ nanofiber fabrication, as well as an outlook to future possibilities.
Spectra of Raman Scattering in Micro/nano-fibers

cheng guo,liang cui,lijun wang,wei fang,zhong yang xu,yu hang li,xiaoying li

DOI: https://doi.org/10.1364/cleo_at.2014.jth2a.18

2014-01-01

Abstract:We experimentally demonstrate the spectra of Raman scattering in micro/nano-fibers, which is different from that of traditional optical fibers, not only depends on their diameters, but also depends on their fabricating methods.
Optical Microfiber-Based Ultrafast Fiber Lasers

Yuhang Li,Lizhen Wang,Linjun Li,Limin Tong

DOI: https://doi.org/10.1007/s00340-019-7303-z

2019-01-01

Applied Physics B

Abstract:Optical microfibers drawn from conventional fibers have attracted considerable interests and have found many novel applications. Here, we review recent advances in ultrafast fiber lasers based on optical microfibers. Starting with characteristics and fabrication of optical microfibers, which are closely related to ultrafast fiber lasers, we show that characteristics of large portion of evanescent field, tailorable dispersion, high optical nonlinearity, very low optical loss and full compatibility with conventional fibers are greatly beneficial to novel ultrafast fiber lasers. We then highlight recent works on ultrafast fiber lasers based on optical microfibers in terms of fast saturable absorbers made from optical microfiber-supported nanomaterials, dispersion management and high optical nonlinearity, as well as some other novel ultrafast fiber lasers. Finally, we briefly discuss future opportunities for optical microfiber-based ultrafast fiber lasers, such as high-order dispersion management, nonlinearity management and applications for sensing and measurement.
Fabrication Of Mnfs

Limin Tong,Michael Sumetsky

DOI: https://doi.org/10.1007/978-3-642-03362-9_3

2010-01-01

Abstract: Similar to standard optical fibers, the materials used for fabrication of optical MNFs are mostly glasses or glass fibers. As one of the fundamental materials in fields ranging from photonics, electronics and chemistry to biology, glass presents a number of advantages over other materials (e.g., crystal and metal) in homogeneity, transparency, ease of fabrication and excellent solvent properties[1-3]. Recently, micro- or nanostructurized glasses, including low-dimension glasses such as one-dimension nanofiber or nanowires, have been attracting growing interest in a variety of fields such as nanoscale mechanics, photonics, and electronics [4-9].

Optical Microfibers and Nanofibers: A Tutorial

Nanofibers and Nanowires Tutorial Talk

Optical microfibers and their applications

Brief Introduction to Optical Microfibers and Nanofibers

Recent Progress in Optical Micro/Nanofiber Technology

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Microfiber Optical Sensors: A Review

Micro/Nanofibre Optical Sensors: Challenges and Prospects

Glass Nanofibers for Micro- and Nano-Scale Photonic Devices

Nanofibers and Nanowires and Nanowires

Micro/nanofiber optical sensors

Micro/Nanofiber and the Application Exploration Chinese Full Text

Nanophotonics And Nanofibers

Optical Micro/nanofiber Enabled Tactile Sensors and Soft Actuators: A Review

Microfiber and Nanofiber Optics: Principles and Applications

Silica Nanofibers and Subwavelength-Diameter Fibers

Novel micro/nano-scale photonic devices

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Spectra of Raman Scattering in Micro/nano-fibers

Optical Microfiber-Based Ultrafast Fiber Lasers

Fabrication Of Mnfs