Abstract:The existence of impuritiy phases such as Bi25FeO39 and Bi2Fe4O9 has led to high leakage current in BiFeO3 multiferric materials, which consequently restricts further understanding of its coupling between magnetic and polarization orders. Prior to the attempts to synthesize pure-phase BiFeO3 ceramics, the phase transition involved in the reaction sintering should be clarified. In the present, the phase transformations during the reaction sintering process of BiFeO3 ceramics with different molar ratio of Bi2O3/Fe2O3 in air were studied via High Temperature X-ray Diffraction technique (HT-XRD), Rietveld refinement quantification, and High Temperature Raman Spectroscopy (HT-Raman). The thermal stabilities of BiFeO3, Bi25FeO39 and Bi2Fe4O9 ceramics were also studied by such methods. The qualitative phase distributions after heating were analyzed by Electron Backscattered Diffraction (EBSD). Results show that the phase transition from monoclinic to cubic for Bi2O3 was well done, which usually taken place at 700 °C. The Fe2O3 did 1036 无机材料学报第 34 卷 not react with Bi2O3 to form BiFeO3 until that transition finished. In addition, BiFeO3, Bi25FeO39 and Bi2Fe4O9 phases are not in thermodynamic stable state during the cooling process for Bi excess samples. Bi2O3 excess can effectively inhibit the formation of impurities and promote the sintering of BiFeO3 phase. The phase content of BiFeO3 mainly depends on the molar ratio of Bi2O3/Fe2O3, and 1.03 : 1 is optimum. Combining with our previous research results, it is found that the effective parameters for the synthesis of BiFeO3 strongly depend on the excessive Bi and rapid heating and cooling rate. This work may provide useful experimental guidance for the preparation of pure-phase BiFeO3 ceramics.

Structure and phase transition of BiFeO 3 cubic micro-particles prepared by hydrothermal method

Synthesis, Structures and Properties of Single Phase BiFeO 3 and Bi 2 Fe 4 O 9 Powders by Hydrothermal Method

Phase and Morphology Evolution of Bismuth Ferrites Via Hydrothermal Reaction Route

Effect of poly sodium-p-styrenesulfonate on the phase formation and morphology of the hydrothermally synthesized bismuth ferrite powders

Stoichiometric Ratio on Phase Transformation in Reaction Sintering of BiFeO3 Ceramics Study: a High Temperature X-ray Diffraction Study

Multiferroic Orders in 0.5Bifeo3–0.5bi0·5k0·5tio3

Polar Order Evolutions Near the Rhombohedral to Pseudocubic and Tetragonal to Pseudocubic Phase Boundaries of the Bifeo3-Batio3 System

Hydrothermal Synthesis, Photocatalytic and Magnetic Properties of Pure-Phase Bi2Fe4O9 Microstructures

The hydrothermal synthesis and formation mechanism of single-crystalline perovskite BiFeO3 microplates with dominant (012) facets

Soft Mode Driven Monoclinic Phase in Multiferroic Bifeo3

Structural phase transition and thermal expansion in Bi 1-2.5xPr1.5xBaxFeO 3 ceramics

Soft-mode Driven Tetragonal-to-monoclinic Phase Transition in Multiferroic BiFeO3

Microwave-Hydrothermal Synthesis and Structural Characterization of Multiferroic Bismuth Ferrite Nanostructures

Chemical Co-Precipitation Synthesis and Properties of Pure-Phase BiFeO3

The ferroelectric-paraelectric phase transition in BiFeO3: crystal structure of the orthorhombic beta-phase

Synthesis and Magnetic Property of Submicron Bi2fe4o9

Controlled Fabrication of BiFeO<sub>3</sub>Uniform Microcrystals and Their Magnetic and Photocatalytic Behaviors

Structure and Piezoelectric Properties of Bifeo3 and Bi0.92dy0.08feo3 Multiferroics at High Temperature

Effect of Temperature Variation on the Phase Transformation in the Reaction Sintering of Bifeo3 Ceramics

Structure Transition and Enhanced Multiferroic Properties of Dy-doped BiFeO3

Ferroelectric and Magnetic Properties in (1-X)bifeo3-x(0.5catio(3)-0.5smfeo(3)) Ceramics