Abstract:In order to explore the combustion performance of a non-road air-cooled two-cylinder turbocharged diesel engine, an experiment on the effects of engine compression ratio, combustion chamber shape and injection timing were systematically conducted in this study. Moreover, the effects of intake air conditions on combustion performance were numerically investigated using the one-dimensional simulation platform. The findings of this study could help provide new insights for promoting the sustainable development of diesel engines used in generator sets. The results show that the increase in intake air temperature can delay the combustion center of gravity and improve the combustion performance and the sustainability of diesel engines. The decrease in intake air pressure leads to a reduction in oxygen amount during the combustion process, thus causing the deterioration of cylinder pressure and combustion performance. By modifying the combustion chamber, the ignition delay and combustion duration are each extended by 1.6 degrees and 4.2 degrees under 100% engine load. The ignition delay and combustion duration are not obviously affected by modifying the combustion chamber shape under 25% and 50% loads. By increasing the compression ratio from 19.5 to 20.5, the ignition delay and combustion duration are shortened, which could enhance the cylinder pressure and heat release rate. However, reducing the compression ratio from 19.5 to 18.5 could significantly decrease the heat release rate. Under middle and low loads, combustion duration is less affected by injection timing. Under 100% load, the peak cylinder pressure increases to 11.4 MPa, and the ignition delay is shortened by advancing injection timing from −17 °CA to −20 °CA.

Experimental investigation on emissions and combustion characteristics of two-stage turbocharged heavy-duty diesel engine

Experimental Investigation for the Impact of Two-stage Turbocharging System on Light-duty Diesel Engine

A Theoretical and Experimental Study on the Effects of Parameters of Two-Stage Turbocharging System on Performance of a Heavy-Duty Diesel Engine

Research on Two-staged Sequential Turbocharging System for Diesel Engine

Investigation of Influence of Two-Stage Turbocharging System on Engine Performance Using A Pre-Design Model

Experimental on Load Transit Performance of Diesel Engine with Regulated Two Stage Turbocharging System

Experimental investigation on performance of vehicle diesel engine with sequential turbocharging system

Experiment on Characteristic of Bypass Valves and Regulating MAP of a Regulated Two-Stage Turbocharged Diesel Engine

Effect of Optimization Matching Between Post Injection Technology and Two-Stage Turbocharging System on Combustion Process

Experimental Study on Performances of Diesel Engine with 3-Phase Sequential Turbocharging System and Unequal Size Turbochargers

Experimental Study On The Three-Phase Sequential Turbocharging System With Two Unequal Size Turbochargers

Matching and Optimization to Minimize Fuel Consumption and NOx Emission for a Marine Diesel Engine with Turbo-Assisted Exhaust Gas Recirculation

Development of Combustion System of a Low-Emission Heavy-Duty Diesel Engine with EGR

Performance and Emission Characteristics of HD Diesel Using EGR Under Low-Speed and High-Load Conditions

Exploring the Combustion Performance of a Non-Road Air-Cooled Two-Cylinder Turbocharged Diesel Engine

Potential of Emission Reduction of a Turbo-Charged Non-Road Diesel Engine Without Aftertreatment under Multiple Operating Scenarios

Design and Matching Test of Two-Stage Sequential Supercharging System for Diesel Engines

Improvement of Emission Performance of Two-stroke Diesel Engines with Two-stage Injection

Combustion Characteristics and Emission of a Two-Stroke Compression Ignition Engine with Two-Stage Injection

Effects of Turbocharger Structure Parameters on Exhaust Emissions of a Non-Road Direct Injection Diesel Engine

Experimental Research on Performance of Two-stage TurbochargingSystem at Both Plain and Plateau