Abstract:A refractive index sensor based on single-mode no-core single-mode fiber structure is proposed and experimentally demonstrated.When the difference between surrounding refractive index(SRI) and the refractive index of no-core fiber(NCF) is relatively small,the NCF can be treated as a weakly guiding multimode fiber with step-index profile,constructing the traditional single-mode multimode single-mode (SMS) fiber structure.Under the weakly guiding condition,the mode excitation and the output characteristics of this sensor are analyzed by using linear polarization mode approximation method.And numerical calculations are carried out based on the theoretical analysis.Numerical simulations show that the characteristic wavelength in the output spectrum will shift as the SRI changes,which reflects the refractive index sensing capability of this fiber structure.For verifying testify the conclusion of the numerical simulation,several experiments have been carried out.As the SRI increases,the characteristic wave-length shows blue shift correspondingly,which agrees well with the numerical simulation and the theoretical anticipatioa The sensitivity of this sensor obtained from experiments reaches 205.42 nm/RIU for a refractive index range from 1.3 to 1.4.And a further confirmatory experiment for testing the absolute ethylalcohol in room temperature indicates that such a refractive index sensor s relative error is 0.1%.

A Refractive Index Sensor Based on A Twin-Core Fiber Integrated Coupler

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper

Sensitivity-enhanced Refractive Index Sensor by Using Tapered Thin-Core Fiber Based Inline Mach-Zehnder Interferometer

Tunable Mode Coupler in the Microfluidic Channel for the Fiber Optics Refractive Index Sensor

High Sensitivity Refractive Index Sensor Based On Tapered Thin-Core Fiber

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Sensitive Enhanced Refractive Index Sensor Based on Series Tapered Thin-Core Microfiber with Vernier Effect

A Compact Refractive Index Sensor with High Sensitivity Based on Multimode Interference

Intensity-Interrogated Refractive Index Sensor Based on Exposed-Core Multicore Fiber Mach-Zehnder Interferometer

Novel Intensity-demodulated Fiber-optic Refractive Index Sensor Based on Splicing Point Tapered Fiber

Core-cladding mode recoupling based fiber optic refractive index sensor

Refractive Index Laser Sensor Based on Seven Core Fiber at 2 μm

Multi-Point Fiber-Optic Refractive Index Sensor by Using Coreless Fibers

A High‐sensitivity Refractometer Based on Etched Thin‐core Fiber Modal Interferometer

Folded-tapered multimode-no-core fiber sensor for simultaneous measurement of refractive index and temperature

A Refractive Index Sensor Based on Single-Mode No-Core Single-Mode Fiber Structure

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Modeling Of A Single-Notch Microfiber Coupler For High-Sensitivity And Low Detection-Limit Refractive Index Sensing

Sensing Characteristic of Optical Fiber Refractive Index Sensor Based on Core Diameter Mismatch

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation