Abstract:The steel industry is an energy-intensive and CO2-intensive industry and the greenhouse gas (GHG) emission in the steel industry was more than 2.95 billion tons in 2012, which faces the great challenge of energy saving and CO2 emission reduction in the context of global warming. The heat recovery from high temperature slags (1450-1650 degrees C) from the metallurgical process represents one of the greatest potential to reduce the carbon emission in the steel industry (460 million tons of blast furnace slags (BFS) and 150 million tons of steel slags (SS) in 2012). The basic constraints of slag heat recovery include the low thermal conductivity and the easy crystallization trend. To meet these constraints and achieve the aim of heat recovery, many methods have been proposed and investigated during the past few decades, which could be divided into physical method, chemical method, and other method based on the working mechanism. The fundamental property of the hot slags that the cooling path of the slags could be composed of three regions, namely the liquid region, the crystallization region and the solid region, determined that a two-step physical method composed of a granulation atomizer and a fluidized bed for heat transfer and a two-stage process combined with physical dry granulation and chemical reaction are theoretically reasonable, which represents the research trend nowadays. The combination of the phase change material (PCM) heat storage and chemical methods could make up another research trend in the future especially when the crystallization behavior of the molten slags could be ignored. Besides, in the integrated system proposed recently, the obtained glassy blast furnace slags could be utilized in the cement industry because of the severe challenge of GHG emission reduction in the cement industry (3.7 billion tons of CO2 in 2013). Only by employing a reasonable and efficient method, could the waste heat in the high temperature slags be effectively recovered and target of the GHG emission reduction in the steel industry be achieved.

Waste Heat Recovery from Blast Furnace Slag by Chemical Reactions

Dry Granulation of Molten Blast Furnace Slag and Heat Recovery from Obtained Particles

Heat Recovery from Hot Blast Furnace Slag Granulates by Pyrolysis of Printed Circuit Boards

Development of Heat Recovery from Blast Furnace Slag Using Dry Granulation Methods

Development of Studies on Sensible Heat Recovery from Blast Furnace Slag by Chemical Methods

Waste Heat Recovery in the Production of Furnace-Grade Phosphoric Acid

Techno-Economic Analysis of a Novel Full-Chain Blast Furnace Slag Utilization System

Heat Recovery from High Temperature Slags: A Review of Chemical Methods

A Review of Granulation Process for Blast Furnace Slag

Research status of centrifugal granulation, physical heat recovery and resource utilization of blast furnace slags

The production of hydrogen-rich gas by wet sludge pyrolysis using waste heat from blast-furnace slag

Combining theory and experiment analysis in molten BFS waste heat recovery integrated with coal gasification

Some Methods and Problems on Heat Recovery from Molten Blast Furnace Slag

Progress in Molten Blast Furnace Slag Treatment Using Dry Centrifugal Granulation Technology

Energy Saving and Emission Reduction from the Steel Industry: Heat Recovery from High Temperature Slags

A review of waste heat recovery technologies towards molten slag in steel industry

The Production of Hydrogen-Rich Gas by Catalytic Pyrolysis of Biomass Using Waste Heat from Blast-Furnace Slag

Disposal of High-Temperature Slags: A Review of Integration of Heat Recovery and Material Recycling

Effect of Oily Sludge Treatment with Molten Blast Furnace Slag on the Mineral Phase Reconstruction of Water-Quenched Slag Properties

Preparation of Slag Wool by Integrated Waste-Heat Recovery and Resource Recycling of Molten Blast Furnace Slags: From Fundamental to Industrial Application

Preparation of Expanded Slag Ball with Blast Furnace Slag by Rotary Cup