Energy Saving and Emission Reduction from the Steel Industry: Heat Recovery from High Temperature Slags

Yongqi Sun,Zuotai Zhang

DOI: https://doi.org/10.1007/978-3-319-26950-4_12

2017-01-01

Abstract:The steel industry is an energy-intensive and CO2-intensive industry and the greenhouse gas (GHG) emission in the steel industry was more than 2.95 billion tons in 2012, which faces the great challenge of energy saving and CO2 emission reduction in the context of global warming. The heat recovery from high temperature slags (1450-1650 degrees C) from the metallurgical process represents one of the greatest potential to reduce the carbon emission in the steel industry (460 million tons of blast furnace slags (BFS) and 150 million tons of steel slags (SS) in 2012). The basic constraints of slag heat recovery include the low thermal conductivity and the easy crystallization trend. To meet these constraints and achieve the aim of heat recovery, many methods have been proposed and investigated during the past few decades, which could be divided into physical method, chemical method, and other method based on the working mechanism. The fundamental property of the hot slags that the cooling path of the slags could be composed of three regions, namely the liquid region, the crystallization region and the solid region, determined that a two-step physical method composed of a granulation atomizer and a fluidized bed for heat transfer and a two-stage process combined with physical dry granulation and chemical reaction are theoretically reasonable, which represents the research trend nowadays. The combination of the phase change material (PCM) heat storage and chemical methods could make up another research trend in the future especially when the crystallization behavior of the molten slags could be ignored. Besides, in the integrated system proposed recently, the obtained glassy blast furnace slags could be utilized in the cement industry because of the severe challenge of GHG emission reduction in the cement industry (3.7 billion tons of CO2 in 2013). Only by employing a reasonable and efficient method, could the waste heat in the high temperature slags be effectively recovered and target of the GHG emission reduction in the steel industry be achieved.