Abstract:Synchronous calibration for the triaxial accelerometers with nonultrahigh (similar to 10 kHz) frequency response requires synchronous shocks with high amplitudes and wide pulse widths (narrower band). However, the generation of high-energy shocks with both large widths and high amplitudes is challenging at this stage, especially for the shocks requiring synchronization in three dimensions. This article then focuses on the method investigation for the generation of synchronous shocks with wide pulse widths and its application in triaxial accelerometer calibration. A device capable of generating 3-D synchronous shocks with an amplitude of 10(2) g and a pulsewidth of 3.5-4 ms, or an amplitude of 10(3) g and a pulsewidth of 0.85-1.1 ms, was developed based on a high-energy vertical shock device and a shock amplification technique. It complements the amplitude and pulsewidth ranges that cannot be covered by the common Hopkinson bar method. A synchronous calibration method for triaxial accelerometers was then proposed based on the shocks generating method. The sensitivity of the triaxial accelerometer was mathematically characterized as an exploitation and sensitivity matrix using the least-square method. Calibration experiments were carried out on a typical high-g triaxial accelerometer using the newly proposed synchronous method and the conventional asynchronous method, respectively. Results show that the developed synchronous shocks generating method is feasible and effective for triaxial accelerometer calibration. And synchronous calibration methods ought to be given priority for triaxial accelerometers, because they can significantly improve the measurement accuracy. At last, several key issues regarding to the application of the proposed shocks generating method in triaxial accelerometer calibration were discussed.

Shock Calibration for a High-G Accelerometer Using a Laser Interferometer

Shock Calibration of Three- Axis Piezoresistive Accelerometer by Laser Interferometer

Shock Calibration of the High-g Triaxial Accelerometer

A Method for Synchronous Shock Calibration of Triaxial High-g Accelerometers Based on Modified Hopkinson Bar Technique

Theory and Method for Calibration of High-g Accelerometers with a Narrow Shock Pulse

Shock calibration principle of a high-g accelerometer with a wide pulse excitation

Shock Calibration of Piezoresistive High-Gn Microaccelerometer

Study on Several Key Problems in Shock Calibration of High-G Accelerometers Using Hopkinson Bar

Calibration of the High-g Accelerometer with Laser Interferometer and the Method for Signal Processing

Calibration of High Shock Acceleration Sensors

Generation of Wide-Pulse-width Synchronous Shocks and Calibration for Triaxial Accelerometers

Measurement of exciting pulse for calibration of high-g accelerometer using lateral laser interferometer

Study on dynamic calibration of high-impact test and measuring system

Sensitivity Matrix Calibration of Triaxial High-G Accelerometer Based on Triaxial Shock Calibration Device

Quasi-Static Calibration Method Of A High-G Accelerometer

Synchronous Dynamic Calibration of Triaxial High-G Accelerometers Using a Modified Hopkinson Bar Method: Theory, Principle and Experiment

Research on the Dynamic Linearity Calibration Method of High-g Accelerometers

IMPACT EXPERIMENT ANALYSIS OF MEMS ULTRA-HIGH G PIEZORESISTIVE SHOCK ACCELEROMETER

Novel high-performance piezoresistive shock accelerometer for ultra-high-g measurement utilizing self-support sensing beams

A High-G Shock Tester with One-Level Velocity Amplifier

Optimization design and shock calibration of pendulous high-g micro-machined accelerometer