Abstract:Advances in Mechanical Engineering, Volume 16, Issue 4, April 2024. The titanium alloy open integral micro impeller has a strong material strength and high removal rate in the field of multi-axis CNC machining. The flow channel is tiny and the blades are thin and highly twisted. It is difficult to control the surface accuracy and prone to overcutting and undercutting. The NX2212 software post-processing module plans two distinct blade finishing process routes and verifies them using virtual machine tool simulation, taking into account the technical challenges of micro impeller machining. Following verification, the tool path machining code is imported into MATLAB for data fitting. The workpiece surface working condition is determined based on the simulation findings, the blade surface roughness value is calculated, and a physical simulation model of blade finishing is created in the finite element analysis software. The outcomes demonstrate how well the "segmented and sub-regional cutting" processing method may raise blade accuracy. The leading and trailing edges of the blade both had surface roughness increases of 4.86% and 4.19%. The surface morphology of the micro impeller is measured using a white light interferometer, and it is CNC machined using two distinct process methods. The findings demonstrate that there is a significant difference between the value calculated by the finite element analysis software and the surface roughness value measured experimentally which together make up less than 5%. An investigation of the impact of cutting parameters on the surface roughness of micro-structure components is carried out using a three factor, three-level BBD experiment that is founded on the second-order response surface method. The findings indicate that the feed per tooth influences surface roughness more significantly than cutting depth and cutting speed for a reasonable range of cutting parameters; Surface roughness will rise with lower or higher cutting speeds; Raising the feed per tooth and the cutting speed simultaneously may reduce surface roughness; Surface roughness can be accurately predicted and controlled using the second-order response surface method.

The Key Process Technology Research of Open Impeller Processing

Key Technologies Research For Impellers Machining Based On Nx

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Development of Machining Simulation Module of Open CNC

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

An efficient five-axis machining method of centrifugal impeller based on regional milling

Research on the Programming Technology of Five Axis CNC Machining Impeller Based on Virtual Reality Technology

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Multi-axis CNC finishing and surface roughness prediction of TC11 titanium alloy open integral micro impeller

Modeling and machining of integral impeller based on NURBS curve

Efficient Feedrate Optimization Method for Spline Toolpath Based on Typical Characteristics of Integral Impeller

Analysis of Four Axis Linkage Numerical Control Processing Programming of Impeller Based on UG

Five-Axis Flank Milling for Design and Manufacture of Turbocharger Compressor Impeller

A novel high-quality and high-efficiency immersion fluid chemical mechanical polishing process for integral impellers

On-Machine Positioning Method for Integral Impellers Based on Three-Dimensional Point Cloud

Overview on Five-Axis Precision EDM Techniques

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Research on adaptive CNC machining arithmetic and process for near-net-shaped jet engine blade