Study of pulsed vacuum surface flashover characteristics of epoxy composites with TiO 2 fillers

ZengBin Wang,Yonghong Cheng,Yu Chen,Jiabin Zhou,Wei Lu,Kai Wu

2012-01-01

Abstract:In this article, in order to study the effect of micro TiO 2 filler on the pulsed vacuum surface flashover characteristics of the epoxy composites and find out the work mechanism of some related factors, micro TiO 2 is loaded into epoxy. Six kinds of samples with different filler contents are prepared. Their vacuum surface flashover voltages under the 30 ns(rise time)/200 ns (half-height width time) single-pulse are measured, and their dielectric spectrum and thermally stimulated depolarization current (TSDC) are also carried out. Results show that the filler content has a visible effect on the flashover voltage of the TiO 2/epoxy composite material, but there is not linear relation between them. Moreover, the dielectric constant and electrical conductivity of the samples both increase with the increase of the filler content. It is also observed that there are both shallow and deep traps in all the samples, and the regularities of shallow trap and deep trap are different as the function of filler content. According to the experimental results, it is summarized that no one of the parameters studied in the paper is the only the factor that determines the pulsed vacuum surface flashover characteristics of the TiO 2/epoxy composites, and the surface flashover experiment results can be well explained with the model of shallow and deep traps for surface flashover. Furthermore, some improvement of the model is carried out. It is presented that the weakening effect of the shallow trap on the flashover strength is dominative when the filler content is small, whereas the enhancing effect of the deep trap on the flashover strength is more effective when the filler content is large.