Study on the TiO2 Nanotube Array Films for Photocathodic Protection of 304 Stainless Steel

漆海清,朱燕峰,张娟,杜荣归,林昌健

DOI: https://doi.org/10.3969/j.issn.1001-9731.2012.09.015

2012-01-01

Abstract:HighLy ordered TiO2 or Fe doped TiO2 nanotuhe films were prepared on the surfaces of pure titanium by an anodic oxidation method in 0.5wt% NH4F＋1. 0mol/L （NH4）2SO4 , 0.5wt% HF and 0.5wt% HF＋0.10 mol/L Fe（NO3）a solutions, respectively. The morphology, the structure and composition of the as-prepared TiO2 nanotube films were characterized by SEM, XRD and XPS. In the meantime, the performances of photocathodic protection of the films were evaluated by electrochemical measurements. The results indicated that the films mainly consisted of anatase TiO2. When 304 stainless steel in a 0.5mol/L NaCl solution was coupled to the TiO2 film in a 0.4mol/L Na2SO4 solution, its interracial reaction resistance and the electrode potential decreased steeply under ultraviolet illumination, which indicated that TiO2 nanotube arrays could produce a good photocathodic protection effect for the stainless steel. Especially the potential of 304 stainless steel coupled to the Fe doped TiO2 film decreased by 450mV under illumination, and remained lower than the corrosion potential after the light source was cut off for about 6h,showing a better photocathodic protection effect.