Abstract:Three-phase packed distillation has been so far relatively poorly understood. Hence, a Substantial mass transfer model describing the (vapor-liquid-liquid) three-phase flow in packed column is proposed to explore the essence of three-phase distillation. The model enables, for the first time, rigorous computation of all the interphase transfer parameters oil the basis of a thorough consideration of the unique How behaviors (Such as film breakup, rivulet-flow, Surface variation, etc.) Caused by the second liquid. The derived theoretical mass transfer model has been incorporated into the three-phase nonequilibrium Simulation. Moreover, comprehensive experimental investigations have been carried Out using two laboratory-scale columns, and four different packings (Montz-Pak B1-350, Rombopak 9M, Raschig Super-Ring 0.3, and Sulzer Optiflow C.36) were considered. The derived experimental database, covering a wide range of load conditions, is used for flow pattern identification and model validation. For the Studied n-butanol/water/n-propanol system, it is revealed that the flow pattern of file second liquid (aqueous phase) could play a critical role in the system performance. When the second liquid flows below the first liquid film, it will enlarge the interfacial area and enhance the vapor-liquid mass transfer; when the second liquid flows above the first liquid film, it will reduce the interfacial area and degrade the mass transfer. This fundamental flow behavior may essentially result in the discrepancy existing in the highly variable separation efficiencies in three-phase packed columns.

Simulation and experimental study on batch extractive distillation for dichloromethane-ethanol-water

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Separation of Azeotropic Mixtures (ethanol and Water) Enhanced by Deep Eutectic Solvents

Simulation for Separation of Ethanol and Water by Extractive Distillation

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Simulation of extractive distillation process of ethyl acetate—n-hexane system using aspen plus

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Experiment and simulation of distillation process for dimethyl ether refining

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Extractive Distillation of Ethanol/Water with 1-Butyl-3-Methylimidazolium Bromide Ionic Liquid as a Separating Agent: Process Simulation

Process simulation and optimization of energy-saving and environment-friendly methanol distillation device

Mechanistic Analysis and Process Simulation of Ethyl Acetate-Ethanol Separation by Complex Solvent Extractive Distillation

Experimental and simulation studies on the simultaneous removal of methanol and water from dimethyl ether crude gas by choline-based deep eutectic solvents

Simulation of Acetophenone and Α-Phenylethanol Separation by Extractive Distillation

Vapor-Liquid Equilibria and Conceptual Design of Extractive Distillation for Separating Ethanol and Ethyl Propionate

Study on the Separation of Binary Azeotropic Mixtures by Continuous Extractive Distillation

Separation for diethoxymethane/ethanol/water by a thermally coupled extractive pressure swing distillation process with mixed solvent

Simulation of Methylnaphthalene Alkylation Product Distillation by Aspen Plus

Isobaric Vapor-Liquid Equilibria and Extractive Distillation Process Design for Separating Methanol and Methylal

Simulation on Separation of Benzothiophene by Extractive Distillation