Abstract:Excessive exposure to noises, which corresponds to unwanted and/or unpleasant sounds, poses as a threat to people's health and can cause irritability, insomnia and even hearing loss. To attenuate noises, sound absorbers usually composed of porous materials are widely used. These, which appear as large networks of interconnected pores, are capable of absorbing medium and high sound frequencies, specially, transforming into heat the majority of the sound energy that reaches them. Such dissipations occur due to viscous, thermal and inertial losses resulted from interactions between the solid and fluid phases from which the porous materials are composed of. With the growing demand for acoustic comfort, one of the most important topics in noise control engineering is currently the search for sound absorption materials that provide attenuations in wide frequency ranges with minimum cost, weight and thickness. Fiberglass wool and melamine foam are widely used, and a variety of new porous materials are being developed, such as polymer micro- and nanofiber mats obtained by electrospinning. It is here investigated the acoustic potential of the electrospun polycaprolactone (PCL) fiber mat, normally used as a biomaterial. The sound absorption capacity of a material is given by its sound absorption coefficient ( α ), while its sound insulation capacity is denoted by its transmission loss (TL), and these are normally conflicting. In an impedance tube, through the transfer function and the transfer matrix methods, α and TL curves are here determined for samples of fiberglass wool and melamine foam with 25 mm width, and later these combined with a layer of approximately 0.3 mm of PCL fiber mat. With the addition of a fine layer of those polymeric fibers to both base materials, it was observed expressive gains in the sound absorption and transmission loss potentials in almost all the totality of the frequency range analyzed, which extends from 400 to 2500 Hz. It was also analyzed the morphology of the study materials through Scanning Electron Microscopy (SEM), and their porosities were determined through an optical approach with the aid of X-ray microtomography.

Preparation and design of green sound-absorbing materials via pulp fibrous models

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Preparation and Properties of Foamed Cellulose-Polymer Microsphere Hybrid Materials for Sound Absorption

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Composite Sound-Absorbing Materials Using Electrospun PS Fibrous Membranes and Needle-Punched PET Non-Woven Fabrics

Study on the Manufacture of Sound-absorbing Materials with Collagen Fibers and Plant Fibers

Sound Absorption of Sustainable Polymer Nanofibrous Thin Membranes Bonded to a Bulk Porous Material

Improved sound absorption performance of synthetic fiber materials for industrial noise reduction: a review

Preparation and Low Frequency Sound Absorption Properties of Silicate Composite Material

Flame-retardant, Ultralight, and Superelastic Electrospun Fiber Sponges for Effective Sound Absorption

Sound Absorption Properties of Natural Fibers: A Review

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

Design, Fabrication And Sound Absorption Test Of Composite Porous Metamaterial With Embedding I-Plates Into Porous Polyurethane Sponge

Sound absorption properties of wood-based pulp fibre foams

Preparation and Characterization of Waste Cotton Fabric Reinforced Polylactic Acid Green Composites with Multifunctional Properties in a Low-Carbon Process

Sound Absorption Characterization of Natural Materials and Sandwich Structure Composites

A novel sound absorbing material comprising discarded luffa scraps and polyester fibers

Development of a new nanofibrous composite material from recycled nonwovens to improve sound absorption ability

A Novel Sound Absorber Design of Nanofibrous Composite Porous Material

Investigation on Sound Absorption Properties of Kapok Fibers