Abstract:Excessive exposure to noises, which corresponds to unwanted and/or unpleasant sounds, poses as a threat to people's health and can cause irritability, insomnia and even hearing loss. To attenuate noises, sound absorbers usually composed of porous materials are widely used. These, which appear as large networks of interconnected pores, are capable of absorbing medium and high sound frequencies, specially, transforming into heat the majority of the sound energy that reaches them. Such dissipations occur due to viscous, thermal and inertial losses resulted from interactions between the solid and fluid phases from which the porous materials are composed of. With the growing demand for acoustic comfort, one of the most important topics in noise control engineering is currently the search for sound absorption materials that provide attenuations in wide frequency ranges with minimum cost, weight and thickness. Fiberglass wool and melamine foam are widely used, and a variety of new porous materials are being developed, such as polymer micro- and nanofiber mats obtained by electrospinning. It is here investigated the acoustic potential of the electrospun polycaprolactone (PCL) fiber mat, normally used as a biomaterial. The sound absorption capacity of a material is given by its sound absorption coefficient ( α ), while its sound insulation capacity is denoted by its transmission loss (TL), and these are normally conflicting. In an impedance tube, through the transfer function and the transfer matrix methods, α and TL curves are here determined for samples of fiberglass wool and melamine foam with 25 mm width, and later these combined with a layer of approximately 0.3 mm of PCL fiber mat. With the addition of a fine layer of those polymeric fibers to both base materials, it was observed expressive gains in the sound absorption and transmission loss potentials in almost all the totality of the frequency range analyzed, which extends from 400 to 2500 Hz. It was also analyzed the morphology of the study materials through Scanning Electron Microscopy (SEM), and their porosities were determined through an optical approach with the aid of X-ray microtomography.

Investigation on the sound absorption performance of polypropylene/polyethylene glycol ultrafine fibers by melt differential electrospinning process

Preparation and Properties of Damping Materials in Multi-Phase System

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Composite Sound-Absorbing Materials Using Electrospun PS Fibrous Membranes and Needle-Punched PET Non-Woven Fabrics

Investigation on Low-Frequency Sound Absorption Properties of PVB Micro-/Nanofiber Membranes

Research Progress on Sound Absorption of Electrospun Fibrous Composite Materials

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Flame-retardant, Ultralight, and Superelastic Electrospun Fiber Sponges for Effective Sound Absorption

Sound Absorption Property of Polyurethane Foam with Polyethylene Fiber

Preparation and Properties of Foamed Cellulose-Polymer Microsphere Hybrid Materials for Sound Absorption

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

Nylon/PVDF Spacer Fabric with Acoustic-Electric Conversion and Yarn Resonance Effect for Improved Low-Frequency Sound Absorption Property

Preparation and Low Frequency Sound Absorption Properties of Silicate Composite Material

Structural and sound absorption properties of polyethylene terephthalate (PET) and recycled polyethylene terephthalate (r-PET) nanofibers

Water Resistant Self-Extinguishing Low Frequency Soundproofing Polyvinylpyrrolidone Based Electrospun Blankets

Sound absorption performance of flexible polyurethane/silicon dioxide perforated coating composites

Excellent broadband sound absorption in composites manufactured by embedding piezoelectric polymer aerogels in porous ceramics

Simulation and experimental investigation of electret polypropylene fiber preparation via centrifugal melt electrospinning for enhanced air filtration

Sound absorption coefficient analysis and verification of weft-knitted spacer fabrics for noise reduction application

Design, Fabrication and Sound Absorption Performance Investigation of Porous Copper Fiber Sintered Sheets with Rough Surface