Abstract:Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

Miniature CMOS Stacked Spiral-Coupled Directional Coupler With 67-dB Isolation and 0.8-dB Insertion Loss

A Compact 6 Ns Propagation Delay 200 Mbps 100 Kv/mu S CMR Capacitively Coupled Direction Configurable 4-Channel Digital Isolator in Standard CMOS

A Compact 6 ns Propagation Delay 200 Mbps <tex>$100\ \text{kV}/\mu \mathrm{s}$</tex> CMR Capacitively Coupled Direction Configurable 4-Channel Digital Isolator in Standard CMOS

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

A 0.38–67-Ghz Directional Coupler with GSG Interface for Compact VNA System

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Compact Microstrip Line Directional Coupler with High Directivity

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

A Tunable Transformer-Based Cmos Directional Coupler For Uhf Rfid Readers

A 110-260Ghz Dual-Directional Coupler Based on Copper Additive Manufacturing

Ultra-compact Silicon Mode (de)multiplexer Based on Directional Couplers with Subwavelength Sidewall Corrugations

Design of Wideband and Compact Lumped-Element Couplers for 5G Communication

Wideband Directional Coupler Based on Zigzag Coupling and Wedge Structure for Isolation Enhancement

A 0.22–26.5-Ghz Ultra-Wideband Directional Coupler Based on Copper Additive Manufacturing

A Compact Dual-Band Coupler With Coupled Microstrip–Slotlines

A W-band compact wide 1-dB bandwidth semi- lumped quadrature coupler in 65 nm CMOS

Ultra-compact Optical 90° Hybrid Based on a Wedge-Shaped 2 × 4 MMI Coupler and a 2 × 2 MMI Coupler in Silicon-on-insulator.

A CMOS SPDT RF Switch with 68 Db Isolation and 1.0 Db Loss Feathering Switched Resonance Network for MIMO Applications

A novel compact directional coupler with high directivity based on CRLH transmission lines

A High Coupling Interdigital Coupler Based on Substrate Integrated Coaxial Line