Abstract:A new oscillation-loaded dynamic micro embossing (DME) process was developed as an efficient and flexible deformation-based method to manufacture micro structures on both planar and curved surfaces. This unique process utilizes current to stimulate miniature punch fixed to a small electrodynamic vibrator to oscillate and thus periodically emboss part surface, contributing to the advantages of high efficiency, low forming force and high flexibility. However, the geometry and morphology of micro structure formed by DME process is difficult to control and tailor due to the deficient understanding of the electro-mechanical coupled forming process. Therefore, experimental investigations and theoretical modelling were conducted to unravel the process mechanics and the quantitative relationship between structure geometry and process parameters. Employing punch with single rectangular strip feature, micro grooves and cubic pillars with different widths were obtained on the pure copper workpieces of different grain sizes. The geometry of the formed micro structure was found to be slightly asymmetrical as the result of the kinetic and mechanical interaction between punch and workpiece during forming process. In addition, the quality of formed micro structures was significantly influenced by both the punch feature size and material grain size. The reduction of punch feature size or the rise of grain size can aggravate surface roughening morphology and thus the dimension scatter of formed micro structures. Based on the energy conversion mechanics during the DME process, an analytical structure geometry model to predict the structure geometric dimensions with different process parameters was established and validated via corroboration with experimental results. Furthermore, the influence of process parameters on the structure depth formability was thoroughly revealed. The structure depth formability first surges with the current frequency and then declines when the current frequency exceeds the resonant frequency, and can be significantly improved by elevating the current amplitude.

Feasibility Investigations on a Novel Micro-Embossing Using Laser-Driven Flyer

Microfabrication Assisted by Laser-Trapped Microparticle Tools

A Study On Fabricating Microdeep Recessed Part On Copper Foil Using Laser Indirect Shock Forming

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Micro Structure Fabrication with a Simplified Hot Embossing Method

Picosecond Laser Interference Patterning of Periodical Micro-Architectures on Metallic Molds for Hot Embossing

Mold Embossing - Based Soft Lithography for Fabrication of Complex Non-rectangular Channels

Warm Microforming Using a Laser-driven Flyer

Unravelling a Novel Oscillation-Loaded Dynamic Micro Embossing Process: Experiment and Modelling

3D Microstructure Manufacture Based on Laser-Induced Thermoplastic Expansion

3D microstructure manufacture method based on laser-induced thermoplastic expansion

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Microstructure and Mechanical Property Characterizations of Metal Foil after Microscale Laser Dynamic Forming

Embellishment of Microfluidic Devices Via Femtosecond Laser Micronanofabrication for Chip Functionalization

Experimental Investigation of the Rapid Fabrication of Micron and Submicron Structures on Polymers Utilizing Ultrasonic Assisted Embossing

Micro/Meso Roll-to-Plate (R2P) Imprinting Process to Fabricate Micro Channel/Riblet Features

Fabrication of Plastic Micro Features on Microporous Mold by Hot Embossing

Alternate Deposition and Remelting Microdroplets Via Single Laser for Printing Low-Defect and High-Performance Metal Micropillars

Experiment and Simulation Study of the Laser-Induced Cavitation Bubble Technique for Forming a Microgroove in Aluminum Foil

An Experimental Investigation on the Fabrication of Micro/Meso Surface Features by Metallic Roll-to-Plate Imprinting Process

Fabrication of Microstructures by Rear-Side Picosecond Laser Irradiation of Two-Layer PMMA