Abstract:Well crystallized aligned zinc oxide nanoscale tubular structures have been fabricated via vapour phase growth on large area substrates. The ZnO nanotubes have regular polyhedral shapes, hollow cores with diameters of 30 100 nm, lengths over a few tens of micrometres and wall thicknesses of 4-10 nm. In morphology, the nanotubes were either straight or twisted with several straight parts. The microstructure of the tubular material was investigated in detail by using high-resolution transmission electron microscopy (HRTEM), Z-contrast imaging and compositional line profile analysis. The chemical composition of individual tubular structures was found to be stoichiometric ZnO using selected area energy dispersive x-ray spectroscopy and electron energy loss spectroscopy. X-ray diffraction (XRD) and selected area electron diffraction results indicated that the ZnO nanotubes had wurtzite crystal structure. XRD analysis and HRTEM investigations indicated the ZnO nanotubes were grown along the [ 001] direction. The growth of the tubular ZnO nanostructures was found to be closely related to the hexagonal nature of the ZnO crystal and the peculiar growth conditions used.

Microwave-Assisted Synthesis of Hexagonal Structure Zno Micro-Tubes

Microwave-Assisted Rapid Synthesis Of Zno Hexagonal Quasi-Hourglasses

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Morphology Investigation of Hydrothermally Prepared ZnO Micro-Crystals Influenced by Cu2+ Ions

Controllable Synthesis of Hexagonal, Bullet-Like Zno Microstructures and Nanorod Arrays and Their Photocatalytic Property

Fabrication and microstructure analysis on zinc oxide nanotubes

Bell-Mouthed Single-Crystalline Tubular Zno Prepared by A Soft Solution Method

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Controllable Synthesis of the Six Prism Zinc Oxide Microtubes and 3D Microflowers Consist of the Six Prism Microrobs

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Fabrication of Tubular ZnO by Vesicle–template Fusion

Zinc Oxide Microtubes Prepared by Optical Thermal Evaporation

Arrays of ZnO Nanowires Fabricated by a Simple Chemical Solution Route

Synthesis of morphology-controlled ZnO microstructures via a microwave-assisted hydrothermal method and their gas-sensing property.

Surface-energy-driven Growth and Optical Modulation of ZnO Hexagonal Microtube Optical Cavities

Straight and Thin ZnO Nanorods: Hectogram-Scale Synthesis at Low Temperature and Cathodoluminescence.

Benzenedicarboxylic Acid-Assisted Synthesis of ZnO Micro-Hexagons from Zinc Hydroxide Nanostrands and Their Photoluminescence Properties

Controllable Synthesis and Characterization of Tube Brush-Like ZnO Nanowires Produced Via a Simple Chemical Vapor Deposition Method

Nanotubular Structures of Zinc Oxide

Hexagonal And Prismatic Nanowalled Zno Microboxes

Synthesis of zinc oxide nanorods using carbon nanotubes as templates