Hybrid coatings with tetraethoxysilane as the inorganic network precursor on polycarbonate for improvement of abrasion resistance

陈宇宏,柳沥翔,詹茂盛
DOI: https://doi.org/10.3969/j.issn.1001-9731.2012.08.035
2012-01-01
Abstract:The hybrid coatings were synthesized through the sol-gel process using MTMS as organic pnase, tetraethoxysilane (TEOS) as the inorganic network precursor and deposited on polycarbonate for improvement of abrasion resistance. FT-IR showed that the cross linked network structure of Si--O--Si formed due to the hy- drolysis-condensation reactions of alkoxy groups in the MTMS/ TEOS sol. The influence of the mole ratios of MTMS and TEOS on the optical properties, pencil hardness, adhesion properties and the abrasion resistance of the coatings were investigated. The result indicate that the MTMS/ TEOS coating possess the best properties when the original molar ratio of MTMS and TEOS is 2 : 1. After 500 wear cycles during an abrasion test, the haze of PC coated with the hybrid coating derived from the optimized component was only 12.69%, while that of uncoated PC rose up to 42.38%. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to determine the microstructure of the MTMS/ TEOS coating and the micrographs revealed the homogeneous dispersion of nanosilica particles in the polymeric matrix.
What problem does this paper attempt to address?