Abstract:The principle of a lock-in thermography for non-destructive tests was researched and the evaluation,defect depth measurement and its application to the detection of honeycomb structure materials and welding bearings were introduced.A Finite Difference Model(FDM)of 2D heat conduction was established and it then was used to compute the temperature variety process on the surface of samples under the condition of sine law modulated heat flux.The lock-in processing method was applied to extract the quasi-steady state temperature variety of the defect and non-defect regions and the phase differences between them was computed.Furthermore,a thermal-electronic equivalence modeling was established by analog to the fundamental laws of heat and electricity,and it was used to simulate the lock-in thermography.The relation between defect depth and phase difference of both incident and reflected thermal waves was obtained.Finally,non-destructive tests were carried out on a honeycomb structure sample with simulated defects and a real welding bearing by the lock-in thermography.Experimental results indicate that the phase deference between defect and non-defect regions obtained by the finite difference model and thermal-electrical equivalence modeling is close to the experimental result,and the bias error is less than 5% as well.The lock-in thermography can rapidly and exactly detect defect sizes and positions,and can be also used in the measurement for the curve surface of a structure.

The study of inspection on SiC coated carbon-carbon composite with subsurface defects by lock-in thermography

Infrared thermal wave imaging for nondestructive detection and measurement of the C/SiC composites

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

A Nonlinear Method for Characterizing Discrete Defects in Thick Multilayer Composites

Inspection on SiC coated carbon–carbon composite with subsurface defects using pulsed thermography

Research on the Quantitative Analysis of Subsurface Defects for Non-Destructive Testing by Lock-In Thermography

Nondestructive Testing Of Defect In A C/Sic Composite

Infrared Thermography For Non-Destructive Evaluation Of 2d C/Sic Composites Under Fatigue Loading

Study on Lock-in Thermography Defect Detectability for Carbon-Fiber-Reinforced Polymer (CFRP) Sheet with Subsurface Defects

Inverse Heat Transfer Approach for Nondestructive Estimation the Size and Depth of Subsurface Defects of CFRP Composite Using Lock-in Thermography

Nondestructive investigation of density defect in C/SiCs and its effect on the mechanical properties

Study on the influence of manufacturing defects on coefficient of thermal expansion of plain weave C/SiC

Experimental Study of Inspection on SiC Coated High-Temperature Alloy Plates with Defects Using Pulsed Thermographic Technique

The inspection of coating thickness uniformity of SiC-coated carbon-carbon (C/C) composites by laser-induced thermal-wave imaging

Thermographic Measurement Methods for Depths of the Blind Holes Drilled in C/SiC Composites

Finite element analysis and experimental investigation of ultrasonic testing of internal defects in SiCp/Al composites

Experimental study on infrared phase-locked thermal imaging inspection of carbon fiber reinforced polymer laminates

Detection on the Coating Peeling of SiC Coated C/C Composites Using Infrared Thermal-Wave Tomography

An Investigation of Dynamic Failure Progress and Properties of 2D C/SiC Composite from 173 K to 1273 K by SHTB

Multi-frequency Fused Lock-in Thermography in Detecting Defects at Different Depths

Thermal Wave Detection and Defect Depth Measurement Based on Lock-in Thermography