Abstract:In this paper, a high-static-low-dynamic stiffness (HSLDS) vibration isolator with a novel parabolic-cam-roller negative stiffness mechanism is proposed to study the effectiveness of negative stiffness on asymmetric spring supporting structures. Based on the physical model, the intrinsic geometrical nonlinearity of the isolator is analyzed and the differential equation of motion is derived by the generalized Lagrange's equation. Here, the multi-term incremental harmonic balance method (MT-IHBM) is employed and extended to capture both primary and subharmonic resonances in nonlinear response. By means of arc length increment, the adaptability and reliability of this method are enhanced under strong nonlinear vibration. Vibration transmissibility and frequency response relationships of various frequency components are demonstrated in order to better explain the properties of asymmetry vibration. The analysis results indicate that the performance of the isolation system is affected by different parametric excitation. Under some parameters, the introduction of negative stiffness will cause obvious 1/2 subharmonic resonance. The existence of the bias term in response makes the peak and frequency of resonances shift vertically and horizontally, respectively. Due to the asymmetry, the proposed HSLDS isolator does not present quasi-zero stiffness at the static equilibrium position, but it has superior ability to suppress vibration. Meanwhile, comparisons show that adding negative stiffness mechanism can still significantly improve the vibration isolation performance when a supporting structure has the characteristic of asymmetric stiffness. (C) 2019 Elsevier Ltd. All rights reserved.

Study on Dynamic Isotropy of a Class of Symmetric Spatial Parallel Mechanisms with Actuation Redundancy

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

The Kinematics and Design for Isotropy of Six-Dof 3-CCC Parallel Mechanisms of General Geometry and Arbitrary Actuation Schemes

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model

Modal Space Decoupled Optimal Design for a Class of Symmetric Spatial Parallel Mechanisms with Consideration of Passive Joint Damping

Statics and Kinematis Analysis of PSS-type Redundant Input Parallel Mechanism

Dynamic performance of over-constrained planar mechanisms with multiple revolute clearance joints

Kinetostatic Modeling Of Redundantly Actuated Planar Compliant Parallel Mechanism

Dynamics analysis and characteristics of the 8-PSS flexible redundant parallel manipulator

Research on High Precision Stiffness Modeling Method of Redundant Over-Constrained Parallel Mechanism.

The Dynamic Modeling, Redundant-Force Optimization, and Dynamic Performance Analyses of A Parallel Kinematic Machine with Actuation Redundancy

Evaluation of dynamic isotropy and coupling acceleration capacity for a parallel manipulator with mixed DoFs

Dynamic Isotropy Design and Analysis of a Six-Dof Active Micro-Vibration Isolation Manipulator on Satellites

Characteristics analysis of joint space inverse mass matrix for the optimal design of a 6-DOF parallel manipulator

Dynamic Modeling and Design for the Parallel Mechanism of a Hybrid Type Parallel Kinematic Machine

Design and Kinematic Analysis of a 3-Translational-dof Spatial Parallel Mechanism Based on Polyhedra

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Static Balancing of a Spatial Six-Degree-of-freedom Decoupling Parallel Mechanism

Design for Solving Negative Stiffness Problem of Redundant Planar Rotational Parallel Mechanisms.

Computer-aided kinematical modeling of parallel mechanism with redundant Inputs

Force/Motion Transmissibility Analysis of Six Degree of Freedom Parallel Mechanisms