Abstract:For direct contact condensation (DCC) simulation, it is a challenge to capture the numerical characteristic of pressure oscillation precisely, especially the frequency and amplitude. It is the most crucial key issue to calculate the mass transfer across the vapor-liquid interface. Up to now, the pressure characteristic is generally obtained by experiment and the existing mass transfer models always lead to unacceptable de-viation from the experiment result. In order to estimate the accurate pressure characteristic, a modified mass transfer model is originally proposed based on the height function method in this paper. An estima-tion method for the interfacial area density in this model is derived from the algebraic spherical model with the mean bubble diameter. This method correlates the interfacial area concentration with the mea-surable interfacial curvature and the interfacial curvature is calculated by the height function method. The proposed model is then employed based on the VOF method for the verification of Stefan's analyt-ical problem and steam bubble condensation problem. The corresponding numerical results are both in great agreement with the analytical and experimental results. In addition, the proposed model achieves its advantage for the steam flow condensation to obtain more accurate results of pressure oscillation than other mass transfer models. The numerical result of pressure oscillation frequency is 8.9 Hz, close to the experimental data of 10 Hz with a deviation of 11%. However, the energy balance model and Lee model predict that the frequencies are 31.5 Hz and 19 Hz relatively with the corresponding deviation of 215% and 90%. It is validated to be convincing with excellent accuracy and shows promise for extensive numerical simulation for direct contact condensation applications. (c) 2022 Elsevier Ltd. All rights reserved.

Void fraction profile in steam-water bubbly condensing flow

Interfacial Area Transport of Subcooled Water–steam Condensing Bubbly Flow in Vertical Pipe

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

General Prediction Models for Void Fraction and Specific Surface Area of Gas–liquid Microflows

Void fraction measurement and calculation model of vertical upward co-current air-water slug flow

Experimental investigation on interface characteristics and heat transfer during bubble condensation in narrow rectangular channel

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Void Fraction Measurement in Steam–water Two-Phase Flow Using the Gamma Ray Attenuation under High Pressure and High Temperature Evaporating Conditions

Numerical Simulation of Steam Condensation in Vertical Tube with the Presence of Non-condensable Gas

Numerical Investigation of Convective Condensation with the Presence of Non-Condensable Gases in A Vertical Tube

Void Fraction Measurements of Steam–Water Two-Phase Flow in Vertical Rod Bundle: Comparison among Different Techniques

Critical Heat Flux Prediction Model for Low Quality Flow Boiling

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Numerical and Experimental Investigation on Water Vapor Condensation in Turbulent Flue Gas

Interfacial characteristics of steam jet condensation in subcooled water pipe flow - An experimental and numerical study

Experimental Investigation on the Interface Shape of Bubble Condensation for Vertical Upward Steam Jet at Low Mass Flux

Acoustic Wave Prediction in Flowing Steam-Water Two-Phase Mixture

Development of a modified mass transfer model based on height function method to capture the pressure oscillation occurred in direct contact condensation process

Flow Characteristic of Steam Jet Condensed into a Water Pipe Flow - a Numerical Study

NUMERICAL SIMULATIONS IN SUBCOOLED FLOW BOILING USING A TWO-WAY COUPLING EULERIAN-LAGRANGIAN MODEL

Numerical Simulation of Subcooled Boiling Water in Vertical Concentric Annulus under Low Pressure