A wall heat transfer model and a skeletal reaction mechanism of iso-octane for CFD simulatiaon of gasoline engines
Shang Liu,Yunliang Qi,Zhelong Lin,Wei Liu,Guoxiang Lu,Bo Wang,Yang Liu,Zhi Wang
DOI: https://doi.org/10.1016/j.enconman.2023.117784
IF: 10.4
2023-11-02
Energy Conversion and Management
Abstract:With the advancements in hybrid vehicle technology and the increasing stringency of fuel consumption regulations, engines are operating more frequently in the high-efficiency zone of medium to high load, aiming to improve fuel economy and enhance vehicle endurance. However, this can lead to elevated engine thermal loads, and require numerous computational fluid dynamics (CFD) simulations to optimize the combustion system of gasoline engines. To address these challenges, it is crucial to accurately calculate the heat transfer process in CFD calculations. Furthermore, it is necessary to optimize and simplify the skeletal reaction mechanism of gasoline-like fuels to predict the combustion process effectively and reduce computational costs. This investigation presents a new heat transfer model and a new iso-octane skeletal reaction mechanism. The heat transfer model takes into account the boundary layer structure and considers the influence of the chemical source term on the heat transfer process of boundaries. Consequently, it enables more accurate predictions of in-cylinder pressure and heat release rate under different engine loads. Moreover, the new skeletal reaction mechanism with 24 species and 25 reactions has been validated against simulation results obtained using the detailed LLNL reaction mechanism, specifically at high pressures and over a wide range of temperatures and equivalence ratios. These validations demonstrate the promising potential of the proposed reaction mechanism for gasoline engine applications, particularly under higher engine load conditions. The difference of peak-pressure between the experiment and simulation coupled with the new heat transfer model and the new reaction mechanism is only about 0.1 % under the high engine load.
energy & fuels,thermodynamics,mechanics