Abstract:Because they have the potential for ultra low NOx emissions and high efficiency, Homogeneous Charge Compression Ignition (HCCI) engines have the potential to develop a significant niche. However, a narrow operating range, (bracketed by severe knock and misfire problems), presents a formidable obstacle to developing usable HCCI combustion systems. HCCI combustion is influenced by a complex array of operating variables including fuel octane quality, intake preheating temperature, compression ratio, equivalence ratio, exhaust gas recirculation and engine component temperature. These variables affect the two critical combustion parameters: ignition timing and combustion duration. If these two parameters can be controlled by appropriate settings of the operating variables, a good HCCI combustion scheme could be achieved. Therefore, the theoretical prediction of these two combustion parameters as a function of the key operating variables is necessary for development of HCCI combustion. This paper describes a stand-alone, single-zone and multi-zone combustion model which have been developed for the specific purpose of investigating HCCI combustion control. In the multi-zone model, temperature and composition in each zone were adjusted in order to study the effect of in-homogeneity which is critical to understanding ignition timing and combustion duration in real HCCI engines. The models simulated HCCI combustion using two fuels: hydrogen, (11 species, 23 reactions- from CHEMKIN library), and natural gas, (53 species, 325 reactions- from GRI mech). The capabilities of the two models to predict ignition timing, combustion duration and peak pressure were verified against experimental and simulation results of Fiveland et al [2, 11]. The models were then used to study the effect of different in-homogeneity levels of equivalence ratio, intake temperature and residual fraction. The single zone model could only predict ignition timing while the multi-zone model shows the capability to mimic realistic HCCI combustion phenomena. The study showed that some degree of in-homogeneity is critical to predicting performance of the homogeneous charge compression ignition engine. Further, stratification of equivalence ratio was relatively ineffective at changing combustion while stratification of mixture temperature was very effective. Stratification of the residual fraction proved to be the most promising method of controlling combustion parameters and the mechanism was primarily thermal.

A SKELETAL KINETIC MECHANISM FOR PRF COMBUSTION IN HCCI ENGINES

A Skeletal Chemical Kinetic Model of PRF Oxidation for HCCI Engines

Application of the Optimized Decoupling Methodology for the Construction of a Skeletal Primary Reference Fuel Mechanism Focusing on Engine-Relevant Conditions

Skeletal Kinetic Modeling for the Combustion of Endothermic Hydrocarbon Fuel in Hypersonic Vehicle

An Autoignition Combustion Model for Homogeneous Charge Compression Ignition Engine Cycle Simulations

Enhancement on a Skeletal Kinetic Model for Primary Reference Fuel Oxidation by Using a Semidecoupling Methodology

A Stand-Alone Multi-Zone Model for Combustion in HCCI Engines

Advancing autonomy of chemical kinetics based multizone models for reactivity controlled compression ignition engines

Kinetic modelling of a surrogate diesel fuel applied to 3D auto-ignition in HCCI engines

Construction of a Small-Sized Simplified Chemical Kinetics Model for the Simulation of n-Propylcyclohexane Combustion Properties

A Transport Equation Residual Model Incorporating Refined G-Equation and Detailed Chemical Kinetics Combustion Models

Study of HCCI Combustion Characteristics with High RON Fuel

Chemical Kinetic Model for Ignition of Three-Component Fuel Comprising Iso-Octane/N-Heptane/Ethanol

HCCI Engine Modeling for Real-Time Implementation and Control Development

Modeling of HCCI combustion: From 0D to 3D

Two-zone Chemical Kinetics Modeling of a Gasoline HCCI Engine

Developing a New Skeletal Mechanism for Propane, Butane, and LPG Fuels

Pressure Oscillation and Chemical Kinetics Coupling During Knock Processes in Gasoline Engine Combustion

Formulation reproducing the ignition delays simulated by a detailed mechanism: Application to n-heptane combustion

Numerical Modeling of the Propagating Flame and Knock Occurrence in Spark-Ignition Engines

Thermodynamic efficiency assessment of gasoline spark ignition and compression ignition operating strategies using a new multi-mode combustion model for engine system simulations