Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Cutting simulation capabilities based on crystal plasticity theory and discrete cohesive elements

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Mechanisms and FEM Simulation of Chip Formation in Orthogonal Cutting In-Situ TiB2/7050Al MMC

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

Research and Analysis of TC4 Titanium Alloy Cutting Based on Crystal Plasticity Theory

Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions

Dislocation Dynamics-Based Modeling And Simulations Of Subsurface Damages Microstructure Of Orthogonal Cutting Of Titanium Alloy

A Modified Constitutive Model Coupled with Microstructure Evolution Incremental Model for Machining of Titanium Alloy Ti–6Al–4V

Machining Simulation of Ti6Al4V Using Coupled Eulerian-Lagrangian Approach and a Constitutive Model Considering the State of Stress

Theoretical Model for Subsurface Microstructure Prediction in Micro-Machining Ti-6Al-4V Alloy – Experimental Validation

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Finite element simulation for Ti-6Al-4V alloy deformation near the exit of orthogonal cutting

Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress

Cutting modeling using cohesive zone concept of titanium/CFRP composite stacks

Orthogonal Cutting Modeling of Hybrid Cfrp/Ti Toward Specific Cutting Energy and Induced Damage Analyses

Research on serrated chip morphology for turning Ti6Al4V titanium alloy by considering damage evolution

Material Removal Behavior of Nanoscale Shear Cutting and Extrusion Cutting of Monocrystalline Γ-Tial Alloy

On the selection of an empirical material constitutive model for the finite element modeling of Ti6Al4V orthogonal cutting, including the segmented chip formation

Numerical simulation of nano-cutting behaviors for polycrystalline γ-TiAl alloy: The effect of grain sizes

MPM Simulations of High-Speed and Ultra High-Speed Machining of Titanium Alloy (ti–6al–4v) Based on Fracture Energy Approach

Multiscale Simulation of Grain Refinement Induced by Dynamic Recrystallization of Ti6Al4V Alloy During High Speed Machining