Abstract:Ground heat exchangers (GHEs) are commonly modeled using the finite-element (FE) method for the design and evaluation of the GHE performance. However, one of the disadvantages of these FE models is the huge computational time involved due to the complex transient three-dimensional (3D) transport phenomena of GHEs. Thus, it is essential to develop an FE model that can provide the inlet and outlet fluid temperature and 3D temperature field with high accuracy and yet with minimal computational time. The primary objective of this study was to create a streamlined numerical model that could serve as an effective and practical design tool for simulating vertical GHEs, emphasizing a high degree of numerical accuracy while minimizing computational time. A computationally efficient 3D transient FE model was developed in COMSOL Multiphysics, which uses an equivalent 1D pipe flow instead of fully modeling the borehole grout. The proposed model prioritizes the simulation of fluid and borehole wall temperatures with an accuracy comparable to the conventional model, but it sacrifices the simulation accuracy of the borehole grout to reduce computational time and offer more convenient meshing. The proposed model was compared with a conventional model and verified against field measurements of outlet fluid temperature and spatial subsurface soil temperature at different depths and radial distances from a 132.5-m GHE operated in a full-scale geothermal bridge de-icing system. Two FE mesh cases––optimum and extrafine––were designed in order to compare the models. The results indicated that the computational time was greatly reduced, by 95% and 81% for the two mesh cases, respectively, while the same level of accuracy in the temperature evaluation was maintained. Also, the required number of model elements was decreased by 90% and 67% for the optimum and extrafine-mesh cases.

A New Constant Heat Flux Model for Vertical U-tube Ground Heat Exchangers

Numerical Simulation and Analysis on the Heat Transfer of the Vertical Ground Heat Exchanger in Hydrous Soil

Cylindrical surface model of ground source heat pump considering soil stratification

A Simplified Numerical Model as a Design Tool for Vertical Single U-Tube Ground Heat Exchangers

Study on Heat Transfer Model of Underground Heat Exchangers with Groundwater Advection

Finite Long Body Source Model of Tube Group after Long-Time Heat Exchange in Ground Source Heat Pump

A General Distributed Parameter Model for Ground Heat Exchangers with Arbitrary Shape and Type of Heat Sources

A new analytical model for transient heat transfer modeling of geothermal monotube heat exchangers

Ground-Source Heat Pump Systems: The Effects of Variable Trench Separations and Pipe Configurations in Horizontal Ground Heat Exchangers

An analytical model for heat transfer outside a single borehole heat exchanger considering convection at ground surface and advection of vertical water flow

A numerical study on heat transfer performances of horizontal ground heat exchangers in ground-source heat pumps

Fast segregation of thermal response functions in short-term for vertical ground heat exchangers

Fast and accurate calculation of the soil temperature distribution around ground heat exchanger based on a Response Factor model

An analytical heat transfer model for the mid-deep U-shaped borehole heat exchanger considering groundwater seepage

Testing a model of flow and heat transfer for u-shaped geothermal exchangers

A Fast Distributed Parameter Model of Ground Heat Exchanger Based on Response Factor

Experimental Study of a Ground Source Heat Pump System Using Vertical Concentric Tube Ground Heat Exchangers

A Simulation Model for Coupled Heat Transfer and Moisture Transport under the Action of Heat Source in Unsaturated Soils

Modeling of vertical ground heat exchangers

A novel study on influence of ground surface boundary conditions on thermal performance of vertical U-shaped ground heat exchanger

Finite element modeling of geothermal source of heat pump in long-term operation