Abstract:Extrinsic (magnetic fields) and intrinsic (austenite grain sizes) factors can effectively control the martensitic transformation. Until now, research has mainly focused on the separate effects of magnetic fields and austenite grain sizes on the kinetics of the martensitic transformation. Systematic studies considering the coupling effects of magnetic fields and austenite grain sizes on the temperature at which martensite is formed (M s), the final volume fraction of the transformed martensite, and the kinetics of the martensitic transformation during continuous cooling are still lacking. Furthermore, no study has yet been reported on the mechanism underlying how magnetic fields and austenite grain sizes affect the martensitic transformation. In this study, SUS321 stainless steel is used to investigate the effect of grain size on the kinetics and mechanisms of the martensitic transformation during continuous cooling from 300 K to 4 K under various magnetic fields by using the physical property measurement system (PPMS). The results show that at a constant grain size, the M-s temperature and the final amount of martensite increase as a function of the magnetic field magnitude. Under the same magnetic field, a critical austenite grain size exists, which obviously accelerates the martensitic transformation during cooling. Detailed microstructural characterizations also show that the external magnetic field effectively promotes the formation of epsilon nucleation sites, which consequently enhances the nucleation rate of alpha'-martensite and its transformation during further cooling. These findings provide mechanistic insights into the previously found phenomenological results. Additionally, in-depth crystallographic analyses also demonstrate that although the magnetic field promotes epsilon nucleation, the variant selection during the gamma ->epsilon transformation is insensitive to the magnetic field magnitude, unlike the austenite grain size. Under the same magnetic field, the increase in the austenite grain size results in more e variants during cooling. The collision of similar epsilon variants restricts the growth of martensite laths and retards the martensitic transformation in coarse-grained austenite. The variant selection of the final transformation epsilon ->alpha' is insensitive to the magnetic field magnitude and the austenite grain size.

Grain size effect on martensitic transformation, mechanical and magnetic properties of Ni-Mn-Ga alloy fabricated by spark plasma sintering

Martensitic transformation, mechanical property and magnetic-field-induced strain of Ni–Mn–Ga alloy fabricated by spark plasma sintering

Microstructural, phase transformation and magnetic properties of Ni - Mn - Ga alloy fabricated by spark plasma sintering

Effect of Chemical Ordering Annealing on Martensitic Transformation and Superelasticity in Polycrystalline Ni–Mn–Ga Microwires

Grain size effect on the martensitic transformation of Ni 50 Mn 25 Ga 17 Cu 8 high-temperature shape memory alloy

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Large Thermal Conductivity and Robust Mechanical Properties of Ni-Mn-Ga/Cu Magnetocaloric Composites Prepared by Spark Plasma Sintering

Microstructure, Phase Transformation and Mechanical Property of Ni-Co-Mn-In Alloy Prepared by Spark Plasma Sintering

Size effect of martensite substructure and interface structure in Ni-Mn-Ga-Gd thin film

Effects of grinding on the martensitic transformation and on the specific magnetization of Fe-29wt% Ni alloy ultrafine particles

Size effect on the martensitic transformation of Ti–Nb shape memory alloy

Extraordinary mechanical properties and room-temperature magnetocaloric effects in spark plasma sintered all-d-metal Ni-Co-Mn-Ti alloy

Strong Grain-Size Effect on Martensitic Transformation in High-Carbon Steels Made by Powder Metallurgy

Effect of Grain Constraint on the Field Requirements for Magnetocaloric Effect in Ni45Co5Mn40Sn10 Melt-Spun Ribbons.

Grain Size Dependence of the Martensitic Transformation in a Nano-Grained Fe–Ni Polycrystal – A Molecular Dynamics Study

Transformation temperatures and magnetoplasticity of Ni–Mn–Ga alloyed with Si, In, Co or Fe

Non-monotonic Grain Size Dependence of Phase Transformation Behavior in NiTi Microscale Samples

Martensitic transformation in nanostructured Fe-Ni alloys

Phase field simulation of grain size effects in nanograined Ti-Nb shape memory alloys

Martensite transformation, mechanical properties and shape memory effects of Ni-Mn-In-Mg shape memory alloys

Synergistic Effect of Magnetic Field and Grain Size on Martensite Nucleation and Variant Selection